Outdoor led display module Special Features
Special Features:
1, Display: shows the small spacing, viewing distance closer; the country star gold and copper support high quality surface mount lamp, horizontal and vertical angle of 140 degrees, light mixing uniformity, color matching degree is high, good consistency, clearer display true, fully meet the needs of outdoor display;
2, Energy consumption: a positive response to the national policy of energy saving by 4.5, switching power supply, power consumption can save 10%;
3, Structure: the bottom shell adopts the reinforcing rib design of quasi construction engineering mechanics, enhance the bearing tensile ability of products and improve the overall smoothness of the mask; the calculation precision with stripe design, greatly reducing the environmental problems due to light reflection on the interference caused by the lamp light, ensure contrast products in a variety of ambient light the degree is the best, the whole screen is more black ink, better contrast, more realistic image color reduction.
4, Circuit: high performance "wig" program for PCB layout design, can effectively control the voltage peak overshoot, the maximum extension of the tube, chips and other components of the life; with power supply, general signal interface, not affected by any geographical and environment control system and other factors, for to be able to easily display various types of connection and installation and operation.
5, Protection: the positive use of special conductive silicone encapsulant, on the back of three spraying paint protection, double waterproof protection, making the product more weatherability, heat faster; the drainage hole of the unique design, reduce the water causes damage to the module due to defects of steel structure, improve the module of self-protection, further to protect the life of display screen.
Different options:
Standard (1) : Led Lamp + Chip + IC Board + Power supply + Control System + Processor
Medium (2) : Standard (1) + Installation Solution
High class (3) : Medium (2) + Installation Solution + Site construction.
MOQ and Sample
1.We welcome sample order to test and check quality .Mixed samples are acceptable.
2.Low MOQ,1 piece for sample checking is available.
3.Please inform us formally before our production and confirm the design firstly based on our sample.
Module Parameter
Pixel pitch | 10mm |
Pixel configuration | 1R1G1B |
LED type | 3-in-1 SMD3535 |
Module size | 320x160mm |
LED lamp | KingLight or Nationstar |
Module resolution | 32x16dots |
Cabinet Parameter
Cabinet size | 960x960mm |
Cabinet material | Ironed steel cabinet |
Cabinet weight | 32.5kg |
Ingress protection | IP65 |
Applications
--- Outdoor and indoor advertising, digital billboards, advertising companies
--- Facades of shopping malls, department stores, banks and car dealerships.
--- Architecture and social projects, information systems in cities.
--- Show-business, concerts, festivals, motor shows and other public events.
Whole Screen Parameter
Pixel density | 10000 dots/m² |
Brightness | ≥5500 cd/m² |
Viewing angle | H:120° V:60° |
Min.viewing distance | 10m |
Max.power consumption | 900W/m² |
Avg.power consumption | 330 W/m² |
Working voltage | 110~220VAC±15% |
Interface | HUB75 |
Colors | 16.7millon colors |
Gray level | 65536 |
Refresh rate | ≥1920Hz |
MTBF | ≥100,000 hours |
Lifespan | ≥100,000 hours |
Protective function | Over-heat/Over-load /Power-down /Power-leakage /Lightning-protection etc. |
Operating temperature | -10℃ ~ +60℃ |
Storage temperature | -20℃ ~ +60℃ |
Control System Parameter
Video signal (with video processor) | AV, S-video,VGA, DVI, YPbPr, HDMI, SDI, DP |
Color temperature | Adjustable by software |
Brightness level | 256 levels, automatic adjustment by software |
Control way | Computer, video-synchronous, real-time, off-line, wireless, internet etc. |
Our Case
Company profile
Shenzhen SCXK Electronic Co.,Ltd established in 2009 and has the standard new factory, about 100 employees. We have outstanding R&D department and after-sell service workers, and separately design ability. Our product mainly included led indoor full color display, led outdoor full color display,led indoor full color display, led wireless car usd screen, poster screen,transparent screen etc.It can be used on the shopping mall, bank, bus station, train station, center of downtown, airport,school,factory,bus,taxi and so on. We adapt many methods and very good after-sell service to sell our product all over the world. Whenever and wherever we are, we always take the principle that is: professional makes good quality,good price product market to price product market to provide perfect product and service for our customers.
Eachinled has a perfect service system, including pre-sale service, in-sale service and after-sale service. To provide high quality service for our customers, we train every salesman with necessary product maintenance knowledge and organized a Technology Supporting Department with a group of excellent and professional engineers. Any problem you can contact us at any time you like.
Pre-sale service:
1. Reply enquiries in 24 hours.
2. Market research and forecast for customer.
3. Provide unique and professional solutions based on customer's requirement.
4. Data sheet and samples offer.
5. Other services, such as special packing design, factory visiting and so on.
In-sale service:
1. Tracking report in producing.
2. Quality test report for every order.
3. Photos and videos as per customer's requirement.
4. Free spare parts.
After-sale service:
1. Lifetime free maintenance and upgrade.
2. Complaint respond period not exceed 24 hours; maintenance guidance and problem solution supplied in 48 hours.
3. Customer satisfaction tracking report.
4. Free technician training.
5. Full set of documents free of charge, which including installation guidance, software operation manual, easy maintenance manual and control system software CD and so on.
6. Special service for big project, such as stadium, exhibitions, squares and so on.