Lacing Anchors are used in the fabrication of insulation blankets or removable covers/pads. The nail is pressed through the insulation material, so the hook portion sits on the top edge and the nail is secured on the opposite side of the insulation with a washer. The two sides of the blanket can then be "laced" together by the hooks with tie wire.
pin diameter | head diameter | head material thickness | hook length | length of the lacing anchor |
14 ga (.080) | 7/8"/30mm | 1mm | 11mm | 1"-4-7/8" |
12 ga (.106) | 7/8"/30mm | 1mm | 11mm | 1"-4-7/8" |
US Standard of lacing anchor | EU standard of lacing anchors | Australia standard of lacing anchors |
The head diameter is 1", | The head diameter is 30mm, | People in Australia will need the US standard or EU standard weld pins, someone will need the 14Ga pin. |
Product | Size(mm) | Quantity | Caton(cm) | Weight |
Lacing Anchors | 12Gauge*2.5" | 1000Pcs | 26*26*18 | 8.6kgs |
Lacing Anchors | 12Gauge*4.5" | 1000Pcs | 26*26*25 | 9.9kgs |
Lacing Anchors | 14Gauge*2.5" | 1000Pcs | 26*26*18 | 10kgs |
Lacing Anchors | 14Gauge*4.5" | 1000Pcs | 26*26*25 | 12.3kgs |