40 Mm Square Head Perforated Base Insulation Hangers Used For Fixing Fire Protection

Technical specification of 40 mm square head perforated base insulation hangers

Standard size of perforated base insulation pins

• Standard size of the base : 25 mm x 25 mm , 40 mm x 40mm , 50 mm x 50 mm
• Standard size of the pin : 12 Ga ( 2.7 MM ) , 3 MM
• Standard size of the pin length : 50 mm , 63 mm , 84 mm , 100 mm , 114 mm , 203 mm
• Standard material of the insulation pins : galvanized steel , stainless steel

Applications of the perforated base insulation pins

Perforated base insulation hangers is exclusively used for fixing adiabatic materials in ducts of air-conditioner, for glass-wool and rock-wool in soundproofing works,and for the duct-lining.

Perforated base insulation hangers are used to attach insulation with the use of General Purpose Adhesive. Masonry and other sound substrates. Surfaces must be clean and dry before adhesive is applied. Some protective coatings are not compatible with adhesives and it is recommended that the user make test bonds before proceeding with the application. After the Pin is installed, insulation is impaled over the spindle and secured with a self-locking washer

Images of perforated base insulation hangers

• perforated base insulation hangers has anti-temperature sudden change, cold resistance and heat resistance;
• High bearing capacity, high pressure bearing and good tensile performance;
• the hanger is easy to install, no special installation tools are required;
• perforated base insulation hangers is not easy to deform, moisture, vibration, and good thermal properties after loading.

Packages details of perforated base insulation hangers

Xiangyi manufacturer introduction