MCA416T MODBUS Tilt Sensor Inclinometer 0.2deg High Accuracy For Solar Tracking
General Description
MCA426M is a MODBUS output inclinometer designed especially for industrial position control. It adopts RS485 hardware differential bus transmit data. It built-in high accuracy 12 bit A/D differential conventor, using third order filter algorithm to measure the pitch and roll angle relate to horizontal level. It could redress the temperature drift according to the inside temperature change , ensuring the high repeatability when it is under high and low temperature. The output respond frequency could reach 20Hz, high frequency could be customized.
Feature
●singl axis
●measuring range ±180°
●accuracy:±0.3°
●DC 9~36V input
●working temp-40~+85℃
●resolution: 0.1°
●IP67
●anti-shock>2000g
●direct lead interface
▶ PARAMETERS
MCA416L | CONDITION | INDEX | UNIT |
Measure range | / | ±80 | ° |
Measure axis | / | Single axis(Y axis) | axis |
Resolution | / | 0.1 | ° |
Absolute accuracy | @25℃ | 0.3 | ° |
Zero temp. coefficient | -40~85° | ±0.4 | °/℃ |
Output Interface | RS485 | ||
communication protocol | MODBUS | ||
EMC | According to EN61000 and GBT17626 | ||
MTBF | ≥50000 hour/time | ||
Insulation resistance | ≥100 megohm | ||
Anti-impact | 100g@11ms,three axes direction(half sinusoid) | ||
Anti-vibration | 10grms,10~1000Hz | ||
Waterproof grade | IP67 | ||
Housing material | Sand-grinding oxidation of aluminum alloy | ||
Screw | Three M4 screws | ||
Cable | Standard 1-meter length, anti-ultraviolet, shielded cable 4*0.4mm2 | ||
Weight | 60g (exclude cable) |
Project