• Power Rj-45 for 10/100BASE-TX Fast Ethernet ports
• Power Over Ethernet Rj45 Magnetics Module
• LINK-PP Rj45 LPJ0009GDNL with Rectifier Bridge
• Ability to convert AC to DC to match the IC
• Rj45 Built in Rectifier Bridge Circuits
• Cross Specification 11A053-5722-00

ELECTRICAL SPECFICATIONS @25℃
1.Turn Ratio: 1CT:1CT
2.OCL(100KHz,0.1Vrms,8mA):350uH Min
3.Insertion Loss:
0.1-100MHz: -1.1dB Max
4.Return Loss:
0.5-30MHz: -18dB Min
40MHz: -15.5dB Min
50MHz: -13.6dB Min
60-80MHz: -12dB Min
5.Cross talk:
0.1-100MHz: -40dB Typ
6.Common Mode Rejection:
0.1-30MHz: -50dB Typ
30-60MHz: -40dB Typ
60-100MHz: -35dB Typ
7.Isolation: 1500Vrms
8.Operating Temperature: 0℃ TO 70℃.

General Requirements

1 Qualification:

Connectors furnished under this specification shall be capable of meeting the qualification test

requirements specified herein.

2 Material:

2.1 Plastic Housings: UL94V-0

2.2 Contacts: Copper Alloy

2.3 Shield: Copper Alloy

3 Finish:

3.1 Contacts: Gold Selectively Plated

3.2 Contacts: Nickel Plated All Over

3.3 Reference Customer Drawing for Contact Solder Tails

3.4 Shield: Tin or Nickel Plated All Over

4 Design and Construction:

Connectors shall be of the design, construction and physical dimensions as specified on the

applicable product drawing and TIA 1096. In case of conflict between this specification and

product drawings, the drawings shall take precedence. 50 minch (1.27 mm) gold plated

connectors compliant with TIA 1096 specifications.

5 Examination of Product:

Connectors shall meet all specified dimensions of product drawings and internal workmanship

standards. There shall be no evidence of cracking, chipping, contamination or loose parts when

inspected, without magnification, to the unaided eye.

6 Ratings:

6.1 Current: 1.5 amperes maximum at 25°C

6.2 Voltage: 150 VAC maximum

7 Minimum Number of Mating/Unmating Operations:

7.1 Performance Level 1: 750 Cycles

7.2 Performance Level 2: 2500 Cycles

8 Minimum Number of Cable Re-Terminations:

8.1 Refer to application drawings

Main Customer

Design for Ti , Intel , Samsung , Fluke , Jabil , Flextronics ,Cypress, Freescale,EKF.......

Applications For Terminal User

Used for networking and communication equipments such as HUB, PC card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem,Call Center solutions , Complex set top boxes , VOIP gateways setup,Border Gateway Protocol,fast ethernet switch ...

Competitive Advantage

18 years production experience,

2600 staff,

100% test

Flexible delivery time

EMS Application

Built-in Flexible PCB Assembly; Rigid-Flexible PCB Assembly; Microelectronic, Flip Chip; Microelectronic, Chip On Board; Optoelectronic Assembly; RF / Wireless Assembly; Through Hole Assembly; Surface Mount Assembly; System Assembly; Printed Circuit Board Assembly