1.Single Port Lan Transformer
2.ColiStructure: Toroidal
3.100base-t transformer
4.SMD, 24 pins
10 / 100 / 1000BASE-TX Dual Port Lan Transformer With 48 Pins
Description:
Dual Port Gigabit Ethernet Magnetics Transformers
Dual Port, 1000 BASE-T LAN Magnetic Transformer, SMD,Rohs | |
LINK-PP Part Number | LP5014NL |
Speed | 1000BASE-T |
Number of Ports | DUAL |
Application - LAN | ETHERNET (NON PoE) |
Package | SMD |
Temperature | 0℃ TO + 70℃ |
AutomDX | YES |
Comment | SAME AS NL VERSION |
Configuration RX | T,C,S |
Configuration TX | T,C,S |
Construction | OPEN FRAME |
Cores Per Port | 16 |
Package Height (Inches) | 0.276 |
Package Height (mm) | 7.00 |
Package Length (Inches) | 1.102 |
Package Length (mm) | 28.00 |
Package Width (Inches) | 0.638 |
Package Width (mm) | 16.20 |
Turns Ratio RX | 1CT:1CT |
Turns Ratio TX | 1CT:1CT |
Electrical Specifications(25):
1. Turns Ratio50KHz, 0.5V
Chip side: Line side=1CT: 1CT+_2%
2. Inductance(Ls)100KHz, 0.1V, 12mA DC Bias:
Chip side: 350uH Min
3. Insertion Loss1-100MHz: -1.4dB Max
4. Return Loss1-30MHz: -16dB Min
40MHz: -14.4dB Min
50MHz: -13.1dB Min
60-80MHz: -12dB Min
100MHz: -10dB Min
5. Differential to Common Mode Rejection:
30MHz: -45dB Min
60MHz: -40dB Min
100MHz: -35dB Min
6. Crosstalk30MHz: -40dB Min
60MHz: -35dB Min
100MHz: -30dB Min
7. Hi-Pot: 1500Vrms Min
Applications:
Used for networking and communication equipments such as HUB, PC card,Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem
Professional Certification:
● ISO 9001:2008
● UL Certification
● Reach Cetitifaction
● RoHS Compliance
● Active Environmental Policy
Lan Product Guide Servers:
● Layering ground planes is advisable. Route connector/discrete module ground pins to chassis/analog ground if possible.
● Keep signal traces from PHY to connector/discrete module as short as possible. If traces exceed 3-4 inches, pay close attention to line impedance imbalance.
● Using BST (75Ω resistors and high voltage cap to chassis ground) to terminate Cable side CTs is advisable for best EMI performance(included in most connector solutions).
● Follow PHY manufacturer’s application notes for further layout.