4x2 Special Purpose Truck One Pull Two Car Flatbed Road Wrecker Tow Truck

Special Purpose Truck One Pull Two Car 4x2 Flatbed Road Wrecker Tow Truck Isuzu Engine 115hp

Equipment introduction of One Pull Two Car 4x2 Flatbed Road Wrecker Tow Truck Isuzu Engine 115hp

Chassis configuration: White / yellow cab, QL1040A6HAY, wheelbase 3360mm, Isuzu 115 horsepower, 7.00R16 steel tires, dual-circuit oil brake, five-speed transmission, with air conditioning, directional assistance, 2 tons in front axle, rear axle 4- 4.8 tons with ABS.

Body configuration: using German technology folding stamping flat plate, the flat plate is 4.2 meters long and 2.3 meters wide, with double-sided linkage operation device, equipped with 2 rear working lights, a 4 ton hydraulic winch with 21 meters wire rope, a tool box, a hand wash Box, equipped with 2 trolleys, 4 binding straps, a pair of L-shaped tire carrier, plus hydraulic telescopic auxiliary board (1.1 meters), Note: Blue card one drag and two obstacle clearance are divided into two types: tail flip and tail telescopic The tail flip board can be customized according to customer requirements. The middle extension board (0.5 meters long, the entire board length reaches 4.7 meters (excluding the tail flip 1 meter))

Features of One Pull Two Car 4x2 Flatbed Road Wrecker Tow Truck Isuzu Engine 115hp

① Folding flat back truck operation

After the power take-off is in the cab, slide the plate out of the card position through the tail control valve and lift it down. Use the wire rope to hoist the vehicle to hold the plate, control the plate to retract up, lower the plate and slide back to the card position.

② Full-floor flat-bed truck operation

It can effectively solve the consignment of road-mounted vehicles and other bottom-suspended vehicles. Equipped with electronic control and manual dual operation. The flat plate can be put down by the hook and arm combination device. After loading, the flat plate can be pulled back by the sentence arm.

③ Rear arm trailer operation

Extend and lower the rear support arm, point it at the front wheel of the vehicle being towed, adjust the width of the support arm, and then broadcast it into the L-shaped tire carrier, lock the left and right wheels, and control the lifting of the support arm to lift the front wheel of the vehicle. When the rear wheel of the towed vehicle is locked, the auxiliary wheel can be used to lift the rear wheel.

New stamping anti-slip nail plate structure: the pre-shaped welding torch process board surface is smoother, more durable

The angle between the surface of the folding flat mechanism and the ground is 8-10- (depending on the model), which is suitable for the operation requirements of the chassis height of most domestic and foreign trolleys.

① Folding flat mechanism

② Full-floor flat plate mechanism

L Multifunction Option

L-shaped fork

Y-shaped fork fork holder

Dedicated strap

3T forged steel hook

Detail specification of One Pull Two Car 4x2 Flatbed Road Wrecker Tow Truck Isuzu Engine 115hp