BS 3262 Thermoplastic Paint with Glass Beads for High Visibility Road Lines
Description
Road-marking plays an important role in the road construction industry. It helps to control moving traffic in an orderly manner as well as reduce the chances of accidents.
we understand that safety is the number one priority for road users. For this reason, we manufacture thermoplastic road-marking materials using a combination of fine aggregates, colour pigments and glass to enhance its reflectivity and visibility.
As a mark of distinction, our products also are made to conform to British Standard 3262, as well as highly durable and cost-effective. Look no further for your quality solution to road-marking materials here at HUA QUN.
Technical Specification
Density(g/cm3) | 1.8-2.3 |
Softening point (℃) | 90-125 |
Compressive Strength(MPa) | ≥12 |
Glass bead content(%) | 0-30% |
Liquidity | 35±10 |
Packing | 25kg/bag |
Color | White/Yellow/Blue/Red/Green/Customized |
Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
Appearance | Powder |
Construction temperature | 180℃-220℃ |
Whiteness | 70-85(Customized) |
Inverse coefficient | 50-550 |
Warranty | 12 months |
Storage Method | Avoid light and moisture |
Packing Size | 45×70×5CM |
Main Components And Features
1. Titanium dioxide: Good whiteness, high purity, small particle size, low oil absorption
2. C5 resin: Outstanding affinity for pigments, good compatibility with EVA, good heat stability
3. PE wax: Heat resistance, abrasion resistance, as a lubricant, increase paint processing performance.
4. Calcium carbonate: High precise classification, high whiteness
5. Glass beads: Drop on glass beads, intermix glass bead, we use top brand beads brand, high reflective.
Formula Customized
Customized Formula | ||
Customized Formula | Content(Customized range) | Characteristics |
C5 Resin | 10%-22% | Fluidity Toughness Hardness Adhesion |
Titanium Dioxide | 0.5-10% | 0.5%-30% |
Premixed glass beads | 0%-30% | Reflective after surface wear |
Calcium Carbonate Sand | 30%-80% | Whiteness Wear-resistant Hardness |
PE Wax | 1%-1.5% | Cold and heat resistant |
EVA | 0.5%-1% | Crack resistance |
Plasticizer | 1%-1.5% | Toughness |
Different Standards
AASHTO Standard | ||
Components | Specification | Test Result |
Resin | ≥ 20% | 22% |
Titanium Dioxide | ≥ 10% | 10.2% |
Glass Beads | ≥ 30% | 32% |
British Standard | ||
Components | Specification | Test Result |
Resin | ≥ 20% | 21% |
Titanium Dioxide | ≥ 10% | 12% |
Glass Beads | ≥ 20% | 21% |
China Standard | ||
Components | Specification | Test Result |
Resin | ≥ 15% | 16.1% |
Titanium Dioxide | ≥ 5% | 8% |
Glass Beads | ≥ 20% | 22% |