EXCAVATOR spare part Hydraulic Plate Compactor For Mini Excavator PC200 ZX140 SK220

Hydraulic vibration compactor is mainly used in conjunction with excavators, installed at the original bucket position at the front end of the boom, and driven and controlled by the hydraulic power of the excavator (installation and control are the same as hydraulic)

Crushing hammer). The structure is simple and easy to use and maintain. Suitable for various terrains and work methods. Can complete flat compaction, inclined compaction, step compaction, and trench pit compaction

And other complex foundation consolidation treatments.

Model Unit MV06T MV13T MV20T

Output power ton 3.5 7 11

Vibration count CPM 1900-2700 2200 2300

Drive oil pressure kgf/cm2 110-150 120-160 140-170

Drive oil volume I/min 45-65 135-155 195-210

Weight kg 350 750 1000

Hydraulic Compactor can be applicable to any position, such as horizon compaction, step compaction, bridge abutment, the trench pit compaction ,sub grade compaction, the corner turning point, backfill compacted, concrete pavement patching compacted, tube side compaction etc, our hydraulic compactor can also be used for pulling piles and broken when necessary.

The excavator pressure oil drives the hydraulic motor to rotate, and the hydraulic motor drives the eccentric mechanism to generate centrifugal force to drive the ramming plate to act on the compacted material.

Applicable conditions and product characteristics:

1.It is used in the turning point of abutment back, culvert

side, corner, shoulder, slope protection, for the tamping of

highway and railway subgrade, dam and slope protection,

building groove,concrete pavement repair,well, pipe

side,etc.

2.Using the hitting power of excavator crushing hammer

to provide power.

3.Fast installation, convenient operation, flexible operation,

practical effect is good, greatly saving costs and improving

work efficiency.