8011 Soft Jumbo Roll Heat Sealing Aluminum Foil For Container Cover

8011 Aluminum Foil Advantages:

1, Brush water grade A, clean surface, uniform color, no spots, smooth without pinholes.

2, Has excellent moisture resistance, shading and high barrier ability, strong mechanical properties, high anti-blasting performance, strong puncture and tear resistance.

3, Non-toxic and tasteless, safe and hygienic.

4, Composite, printing, rubberized aluminum foil is widely used as packaging materials

5,Supply aluminum kitchen foil in small roll

Products Details:

Aluminum foil is aluminium prepared in thin metal leaves with a thickness less than 0.2 mm; thinner gauges down to 6 micrometres are also commonly used. Standard household foil is typically 0.016 mm thick, and heavy duty household foil is typically 0.024 mm. The foil is pliable, and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated to other materials such as plastics or paper to make them more useful. Aluminium foil supplanted tin foil in the mid 20th century.Approximately 75% of aluminium foil is used for packaging of foods, cosmetics, and chemical products, and 25% used for industrial applications (e.g. thermal insulation, cables and electronics). It can be recycled.

1. Heat sealing temperature is an important factor affecting the heat seal strength. If the temperature is too low, the adhesive layer is not well sealed with the PVC film, and the bond between the adhesive layer and the PVC film is not strong. If the temperature is too high, the seal will be affected. Therefore, a reasonable heat sealing temperature is usually between 160 ° C and 180 ° C.
2. Heat sealing pressure To achieve the desired heat sealing strength, it is necessary to set a certain heat sealing pressure. If the pressure is insufficient, not only can the adhesive layer of the product and the PVC film be fully adhered to the heat seal, and even the air bubbles remain between the two, failing to achieve a good heat sealing effect. Therefore, the national standard stipulates that the pressure of heat sealing is 0.2×10Pa.
3. Heat sealing time The heat sealing time also affects the heat sealing strength of the product. Under normal circumstances, under the same heat sealing temperature and pressure, a longer heat sealing time can make the heat sealing portion seal more firmly and better, and can better achieve the desired heat sealing strength. If the heat sealing time is too short, the heat sealing between the adhesive layer and the PVC film is insufficient. To this end, the national standard stipulates that the scientific heat sealing time is 1s.

Production Pictures:

Applicances:

Shipping Packing:

"QUALITY IS SUPREME, REPUTATION GOES FIRST" is our objective.

Zhuofeng always welcome you!

If you have any demand of aluminum products,please feel free to contact us!