Hanger hook type Shot Blasting Machine for cleaing wheel rims

Hanger hook type Shot Blasting Machine description

The hook type shot blasting machine uses a high-speed rotating impeller to throw small steel shots or small iron shots out to hit the surface of the part at a high speed, so the oxide layer on the surface of the part can be removed. At the same time, steel shot or iron shot hits the surface of the part at a high speed, causing the lattice distortion and deformation of the surface of the part, which increases the surface hardness. It is a method of cleaning the surface of the part. Shot blasting is often used to clean the surface of the casting or strengthen the surface of the part. deal with.

Generally, shot blasting is used for regular shapes, etc., several blasting heads go up and down, left and right together, with high efficiency and low pollution. In the shipbuilding industry, shot blasting and sand blasting are commonly used. But whether it is shot blasting or sand blasting, compressed air is used. Of course, it is not necessary to use a high-speed rotating impeller instead of shot blasting. Generally speaking, shot blasting (small steel shots) is mostly used for steel plate pretreatment (rust removal before painting); sand blasting (ores used in shipbuilding and repairing industries) are mostly used for shaped ships or sections. The function is to remove the old paint and rust on the steel plate and repaint it. In the ship repair and shipbuilding industry, the main function of shot blasting and sand blasting is to increase the adhesion of the steel plate coating paint. In fact, the cleaning of casting parts is not just shot blasting. For large parts, the drum sand is generally cleaned first, which is to remove the riser of the casting part and roll it in the drum. The parts collide with each other in the drum, and most of the surface sand Cleared out and then shot blasting or shot blasting. The size of shot blasting balls is 1.5mm.

Technical data

Features

Generally, shot blasting is used for regular shapes, etc., several blasting heads go up and down, left and right together, with high efficiency and low pollution. In the shipbuilding industry, shot blasting and sand blasting are commonly used. But whether it is shot blasting or sand blasting, compressed air is used. Of course, it is not necessary to use a high-speed rotating impeller instead of shot blasting. Generally speaking, shot blasting (small steel shots) is mostly used for steel plate pretreatment (rust removal before painting); sand blasting (ores used in shipbuilding and repairing industries) are mostly used for shaped ships or sections. The function is to remove the old paint and rust on the steel plate and repaint it. In the ship repair and shipbuilding industry, the main function of shot blasting and sand blasting is to increase the adhesion of the steel plate coating paint. In fact, the cleaning of casting parts is not just shot blasting. For large parts, the drum sand is generally cleaned first, which is to remove the riser of the casting part and roll it in the drum. The parts collide with each other in the drum, and most of the surface sand Cleared out and then shot blasting or shot blasting. The size of shot blasting balls is 1.5mm.

Advantage

1. The international fourth-generation cantilever centrifugal shot blasting device with large shot blasting volume and high ejection speed can significantly improve cleaning efficiency and obtain satisfactory cleaning quality. 2. Simulated projectile drawings (including the determination of the model, number and spatial arrangement of the shot blasting machine, etc.) and all drawings of the shot blasting machine are drawn using computer-aided design (CAD), and the selection and layout of the shot blasting machine are more reasonable . The utilization rate of projectiles and labor productivity are improved, the cleaning effect is ensured, and the abrasion of the chamber body guard plate is reduced. 3. The popular pit-free structure is adopted, which not only saves the construction cost and time of the pit foundation, but also solves the problem of rust and agglomeration of shot sand in the hoist caused by the storage of water in the pit in the south. 4. Cleaning the indoor hot zone adopts rolled Mn13 plate protection. Compared with the previous rubber plate protection, its service life is greatly improved, and the appearance is beautiful, and it is easy to replace. It is the most popular way of cleaning machine room protection today.

Our company

1. Qingdao KNNJOO Machine INC.is a manufacturer specializing in the design and manufacture of Shot Blasting Machines and Sand blasting chamber for decades over 20 years in China.

2. Qingdao KNNJOO Machine INC.is design, manufacture and install innovative, economical and high quality shot blasting equipment and provide ongoing customer support through technical assistance and spare parts.
3. Qingdao KNNJOO Machine INC. have the best worker to provide you with a professional shot blasting machines knowledgeable and reliable sales team in order to meet your specific requirements.

4. Through ongoing training and hands on experience our personnel are able to offer you the best advise, technical expertise and cost reduction solutions to improve your performance.