This machine is a new product designed and developed by our company comprehensively at home and abroad. It is a cleaning equipment with good cleaning effect, compact structure, low noise, and good complete set. It has the following characteristics: 
The roller conveyor is used to transport the workpiece, which reduces the collision and damage to the workpiece and reduces the noise of the machine;
The machine adopts Q034 cantilever centrifugal shot blasting machine, which has the characteristics of long service life, simple structure and low failure rate;
The use of a winnowing separator has good separation effect and high productivity, and has a positive effect on improving the life of the blade;
The use of bag filter, the dust emission concentration is lower than the national standard, improving the working environment of workers;
The continuous work of the through-type shot blasting machine structure is not affected by the cleaning time and the loading and unloading of the workpiece, further reducing the labor intensity of the workers
Shot blasting is still an economical and reliable cleaning method in the world. Compared with other cleaning technologies, the shot blasting technology has the following advantages:
Improve the fatigue resistance of mechanical products and metal components
Eliminate stress concentration
Extend its service life
Optimize the surface process state of the workpiece
Improve cleaning efficiency
Reduce the labor intensity of cleaning up
Reduce environmental pollutionWhat needs to be paid attention to during the construction of the steel plate through shot blasting machine: effectively protect the equipment; the roughness of the surface can be processed according to the needs and different grains of steel shots can be selected according to the roughness. Under the action of centrifugal force,
1. The dust in the dust box below the dust collector of the steel plate through type shot blasting machine should be cleaned regularly, which is the protective plate of the chamber body in the current shot blasting equipment. Not only can the rust on the surface of the workpiece be removed, the blast dust mixture can be evenly distributed, and the separator, elevator, screw conveyor and shot blasting device can be started in sequence to prevent the dust exhaust pipe from being blocked and affecting the dust removal effect.　
2. The debris in the bottom of the cleaning room and under the screen in the separator funnel should be cleaned frequently. The device is generally hydraulically driven, and the shot blasting machine is the main part of the shot blasting machine accessories. In the event of a power failure, cut off the main power supply of the machine. It will also increase the abrasion of the curved guard plate. The global qg34 shot blasting device with large shot blasting volume and high shot speed is adopted.
3. Reach the required roughness and hardness, usually arranged in even numbers, such as 4, 6, 8, etc. At the same time, the required cleanliness of the workpiece is ensured. The steel shot around the steel plate through shot blasting machine should be cleaned frequently to prevent slippage and hurt people. In order to carry out the shot blasting of the workpiece.
4. Such as the boom of the excavator, the body of the bulldozer, the bed of a large machine tool, etc. Before starting the pass-through shot blasting machine, some necessary checks must be carried out. It can be said that the comprehensive data is still very good. Generally, it is suitable for relatively long workpieces, such as round steel angle steel with workpiece split ring, etc., which can smoothly pass through the shot blasting chamber. Rebar derusting machine is a kind of shot blasting equipment that can derust and strengthen the metal surface.
Roller-through shot blasting machine. During the cleaning process, the electrically controlled adjustable-speed conveying roller transports the steel structure or steel into the ejection area of the cleaning machine room, and its surrounding surfaces are hit by powerful and dense projectiles from different coordinate positions. With friction, the oxide scale, rust layer and dirt on it will quickly fall off, and the surface of the steel will obtain a smooth surface with a certain roughness. The workpiece is loaded and unloaded on the entrance and exit roller table on both sides of the cleaning room. The projectiles and rust dust falling on the steel are blown by the blowing device, and the dropped pellet dust mixture is conveyed to the chamber funnel by the recovery screw, and the vertical and horizontal screw conveyors are collected in the lower part of the hoist, and then lifted to the upper part of the machine. In the container, the separated pure projectiles fall into the separator hopper for recycling use. The dust generated during shot blasting is sent to the dust removal system by the exhaust pipe, and the purified gas is discharged into the atmosphere, and the particulate dust is captured and collected.