Hot selling automatic stainless steel pneumatic bollard fixed

Product Application

Applicable places
1,State organs and other important units gate: install lift barricades to effectively prevent the entry of vehicles from outside units and illegal vehicles from breaking in.
2,Walking Street: Installing lifting barricades at the intersection of walking street. The barricades are usually in a raised state to restrict the entry and exit of vehicles, and in case of emergency or special situation (such as fire, first aid, leading inspection, etc.) the barricades can be lowered quickly to facilitate the passage of vehicles.
3,Road isolation belt: in the non-enclosed road isolation belt can be used to lift the barricade, usually prevent vehicles from turning left or turning around. In case of road construction, road blockage and other special circumstances, the barricade can be lowered to divert vehicles to pass.
4,Multi-purpose square: The barricades are raised during the day to prohibit vehicles from entering the square, and at night the square is used as a temporary car park and the barricades are lowered so that vehicles can enter and park.
5,Open park: Open park intersections are equipped with lifting barricades, which are usually raised to prevent vehicles from passing and allow visitors to pass freely. In case of special circumstances, the barricades are lowered to allow vehicles to pass.
6,Place where vehicles are restricted from entering such as community, bank, school, etc. and to ensure the effective use of fire escapes.

Functional features
1, Anti-impact: 10mm thick stainless steel cylinder bottom base is used plus cement pouring base bracket, compared with similar products greatly improve the anti-impact performance of this product, so as to ensure that punching vehicles can not cross the blocking barricade.
2, Waterproof: The internal device adopts a fully sealed design, which greatly improves the waterproof performance compared to similar products and avoids maintenance due to water entering the movement.
3, Convenient installation: The installation of semi-automatic lifting barricades is characterised by the absence of external power systems compared to fully automatic hydraulic lifting barricades, making construction convenient and quick.
4, Easy to operate: The manual key to lift and lock the barricade compared to the fully automatic hydraulic lift barricade is characterized by short lifting and landing time, safe and reliable.

Installation and use method
1.Installation method.

After finding the centre point of the location where the barricade needs to be installed and digging out a pit with a diameter of 60cm and a depth of 70cm, lay about 10cm of sand and gravel at the bottom, then put in the barricade to make it flush with the ground level, and then pour cement around the barricade until it is flush with the ground.
2. Method of use.
Lowering: Activated with the key, the mechanism is released and pressure is applied to the top of the barricade to lower the barricade back into the ground and lock it automatically.
Up: Activated with the key, pressure is applied to the top of the barricade and then the pressure is released the barricade will rise and be in the highest position.