125mm Feeding Side Length Cone Crusher 40-50 TPH Tertiary Broken

Equipment introduction

The mechanical cone crusher is a reliable and efficient solution for raw material crushing in various industries. Its slow-speed crushing mechanism, versatility, and ability to control particle shape make it a valuable asset in processing plants. With its low operating costs and robust construction, the rotary cone crusher offers a cost-effective and durable solution for producers seeking high-quality crushed materials.

The working principle of clinker low-speed cone crusher is as follows:
Raw material feeding: The raw material enters the conical crushing cavity from the top of the crusher. The feed port is usually located on the top of the crusher, and the raw materials can be continuously fed into the crushing chamber through a conveyor belt or other devices.
Rotary Crushing Chamber: Once the raw material enters the crushing chamber, the cone crusher starts to rotate. The crushing chamber is lined with strong concave and convex surfaces, called shell and cone, respectively. The housing is stationary, while the cone rotates about the eccentric axis.
Compression and crushing: When the cone rotates, the raw material is compressed between the shell and the cone. Due to the concave and convex surface design of the shell and cone, the raw materials will gradually be compressed and broken into smaller particles. This process is carried out gradually until the raw material is completely broken.
Discharge: The crushed particles gradually move downward along the bottom of the crushing chamber, and are finally discharged from the discharge port at the bottom of the crushing chamber. The discharge port is usually located at the bottom center of the crushing chamber.
The working principle of the clinker low-speed cone crusher is based on the process of rotating the crushing chamber and compressing the crushing process. By controlling the structure and movement mode of the crushing chamber, the bulk raw materials are gradually crushed into fine particles of the required size. This working principle makes the clinker low-speed cone crusher an efficient and precisely controlled particle shape and size crushing equipment.

Device parameters

Main application areas

Cement industry: In the cement production process, clinker low-speed cone crusher is used to crush clinker (such as limestone and clay) into the required powdery raw materials. These raw materials are then used to prepare cement clinker such as gypsum, coal and other additives.
Mining and metallurgical industry: Clinker low-speed cone crusher can be used for the preliminary crushing of ore and mineral ores. It can handle various types of ores, including metallic ores (such as copper, iron, aluminum, etc.) and non-metallic ores (such as coal, limestone, gypsum, etc.).
Building materials industry: In the production process of building materials, clinker low-speed cone crusher can be used to process raw materials such as stone, sand and aggregate. It can break large pieces of raw materials into the required particle size for preparing concrete, asphalt and other construction materials.

Main parameters and performance of equipment

1. The production capacity of this mechanical cone crusher is 40-50 tons per hour. It is a small and medium-capacity equipment and is often used in the field of clinker crushing.

2. The input particle size of this mechanical cone crusher is less than 125 mm, and the output is less than 5-8 mm. It is the first choice for tertiary crushing in the field of cement or clinker crushing.

3. The main components of this mechanical cone crusher are the main machine cylinder, main shaft, drum assembly, driving gear, crushing tooth plate, reducer, motor, etc.

4. The ingenious design of this mechanical cone crusher enables the aggregate to be effectively crushed in the crushing cavity, avoiding repeated crushing and reducing the powder output rate.

Factory live