Coal Crushing Double Roller Crusher 250-450 TPH Low Scrap Rate
Advantages Of Crushing Coal
In coal mine crushing, the value of cinder is much lower than the finished coal mine. How to maximize the output of finished coal mine in coal mine crushing line?
Double Roller Crusher is used in coal mine crushing and has ideal crushing effect.
Unlike traditional crushing plants, they place the coal in a crushing chamber to crush it. The coal mine material is loose and easy to crush. This will make the coal mine be a lot of over-crushed, producing a lot of fly ash and cinder, causing losses and increasing the investment in environmental protection equipment to deal with fly ash.
Based on the three-point crushing method, the coal is instantly pulled and sheared to crush the coal into the required specifications. The Double Roller Crusher has a large throughput, less fly ash and less cinder, improving your production results and forming in one step.
Device Information
Model | XCMD7520 |
Diameter of roller (mm) | 750 |
Length of roller (mm) | 2000 |
Feed size (mm) | ≤140 |
Discharge size (mm) | ≤40-70 |
Output (t/h) | 250-450 |
Power (kw) | 90*2 |
Weight (t) | 30 |
Transfer method | soft connection |
Technical Reference Data
Model | Diameter of roller (mm) | Length of roller (mm) | Maximum side length of feeding material (mm) | Grain size of discharging material(mm) | Production capacity (t/h) | Power (kw) | Soft connection weight (t) | Direct connection weight (t) |
XCMD500 | 500 | 1000 | ≤100 | ≤30-60 | 50-120 | 37*2 | 9.5 | 8.2 |
1500 | 100-180 | 45*2 | 11.8 | 10.5 | ||||
2000 | 150-220 | 90*2 | 14.5 | 12.8 | ||||
2500 | 200-300 | 110*2 | 18 | 16.3 | ||||
XCMD650 | 650 | 1000 | ≤120 | ≤30-60 | 50-130 | 45*2 | 12.3 | 10.5 |
1500 | 100-255 | 55*2 | 18.5 | 16 | ||||
2000 | 200-350 | 75*2 | 23 | 21 | ||||
2500 | 350-450 | 90*2 | 28 | 25 | ||||
XCMD750 | 750 | 1000 | ≤140 | ≤40-70 | 150-250 | 55*2 | 23 | 21 |
1500 | 200-350 | 75*2 | 26.5 | 24.5 | ||||
2000 | 250-450 | 90*2 | 30 | 27.2 | ||||
2500 | 350-550 | 110*2 | 33.8 | 30.8 | ||||
XCMD850 | 850 | 1000 | ≤160 | ≤40-70 | 150-300 | 75*2 | 26 | 23.5 |
1500 | 200-400 | 90*2 | 31.5 | 28.5 | ||||
2000 | 300-500 | 110*2 | 36 | 33 | ||||
2500 | 350-650 | 132*2 | 39 | 36 | ||||
XCMD1000 | 1000 | 1000 | ≤220 | ≤40-80 | 250-450 | 90*2 | 46.8 | 41 |
1500 | 350-550 | 110*2 | 52 | 46.2 | ||||
2000 | 500-700 | 132*2 | 58 | 52.5 | ||||
2500 | 650-800 | 160*2 | 65 | 60 | ||||
XCMD1200 | 1200 | 1500 | ≤250 | ≤40-90 | 650-900 | 160*2 | 81 | 73 |
2000 | 750-1100 | 185*2 | 93 | 85 | ||||
2500 | 900-1500 | 220*2 | 106 | 98 |
Finished Equipment
Our Certificate