Model | Number of layers | Screen area (㎡) | Screen specification (mm) | Maximum feed size (mm) | Production capacity (t/h) | Vibration frequency (r/min) | Dual amplitude (mm) | Power (kw) | Installation inclination (°) | Weight (t) |
XCYK1230 | 1 | 3.6 | 1200*3000 | ≤150 | 8-80 | 960 | 8 | 5.5 | 20° | 2.2 |
2 | 940 | 2.8 | ||||||||
3 | 800 | 11 | 3.5 | |||||||
XCYK1548 | 2 | 7.2 | 1500*4800 | ≤150 | 35-180 | 970 | 8 | 11 | 20° | 5.2 |
3 | 15 | 6.2 | ||||||||
4 | 6.8 | |||||||||
XCYK1860 | 2 | 10.8 | 1800*6000 | ≤150 | 100-255 | 800 | 8 | 18.5 | 20° | 6.9 |
3 | 7.5 | |||||||||
4 | 740 | 22 | 8.2 | |||||||
XCYK2160 | 2 | 12.6 | 2100*6000 | ≤150 | 150-350 | 740 | 8 | 22 | 20° | 9.8 |
3 | 30 | 10.8 | ||||||||
4 | 37 | 12 | ||||||||
XCYK2460 | 2 | 14.4 | 2400*6000 | ≤150 | 150-450 | 740 | 8 | 37 | 20° | 10.8 |
3 | 150-600 | 45 | 12.8 | |||||||
4 | 15.2 |
Name/ Differences | Vibrating screen | Drum screen |
Screening method | Screening using the excitation force generated by a vibration motor belongs to vibration screening. | During the screening process, the equipment will not vibrate, but generally the motor and reducer drive the drum to rotate through bearings. The material passes through the screen from high to low inside the drum due to the rotation of the drum, and is successfully screened out. This belongs to rolling screening. |
Appearance and structure | Mainly composed of screen box, screen frame, screen mesh, vibration motor, motor pedestal, vibration damping spring, bracket, etc. | It is a cylinder, with one or more layers or several sections of screen mesh on the surface to increase the screening specifications. The volume of the drum screen is generally large, mainly composed of a motor, reducer, drum device, screen mesh, frame, sealing cover, and inlet and outlet. Steel rings will be added at the drum device to prevent deformation of the drum screen. |
Working principle | Using a vibration motor as the vibration source, the material is thrown up on the screen and moves forward in a straight line. The material evenly enters the feeding port of the screening machine from the feeder, and through multiple layers of screens, several specifications of screening materials and screening materials are produced, which are discharged from their respective outlets. | The drum device is tilted and installed on the rack. The electric motor is connected to the drum device through a reducer and a coupling, driving the drum device to rotate around its axis. After the material enters the drum device, due to the tilt and rotation of the drum device, the material on the screen surface flips and rolls. Qualified materials (products under the screen) are discharged through the discharge port at the bottom of the rear end of the drum, while unqualified materials (products on the screen) are discharged through the discharge port at the tail of the drum. |
Classification | According to the different layers of the screen, it can be divided into single-layer, double-layer, and three-layer vibrating screens. According to the different motion trajectories of the vibrating screen surface, it can be divided into circular vibrating screens and linear vibrating screens, as introduced above. | According to the different layers of the screen, it can be divided into single-layer, double-layer, and three-layer vibrating screens. According to whether the motor of the drum screen is connected to the bearing, it can be divided into axial drum screens and non axial drum screens. |
Production capacity and applicable occasions | Low yield, suitable for screening fine specification materials. | Large production capacity and long service life, suitable for high production requirements. |
Screening accuracy | High. | Low. |
Our History