High Efficiency Roll Crusher Machine 50-80 TPH Output 10-25mm Discharging Size
Product Description
This Roll Crusher Machine can replace the foreign powerful screening crusher and is a special screening crusher for the production of materials calcined in domestic shaft kiln and rotary kiln. The equipment has the advantages of high yield, good shape of finished products, high crushing rate, long service life and easy maintenance.
The model of this Roll Crusher Machine is XCMD500 * 2500, and the diameter and length of its toothed roller are 500 mm and 2500 mm respectively. The feeding granularity of the equipment is less than 50mm, and the discharging granularity is between 10-25mm. The weight of the equipment of this model is 18 tons, the hourly output is 50-80 tons, and the power of the motor used is 60 kW (30 * 2).
Equipment Advantages
1. The Roll Crusher Machine has double functions of screening and crushing, and automatic cleaning function.
2. The Roll Crusher Machine has good crushing effect and low probability of over-crushing.
3. The Roll Crusher Machine is made of high-strength and wear-resistant materials, which greatly increases the service life of the equipment.
Technical Reference Data
Model | Diameter of roller (mm) | Length of roller (mm) | Maximum side length of feeding material (mm) | Grain size of discharging material(mm) | Production capacity (t/h) | Power (kw) | Soft connection weight (t) | Direct connection weight (t) |
XCMD500 | 500 | 1000 | ≤50 | ≤10-25 | 20-50 | 15*2 | 9.5 | 8.2 |
1500 | 30-60 | 18.5*2 | 11.8 | 10.5 | ||||
2000 | 40-70 | 22*2 | 14.5 | 12.8 | ||||
2500 | 50-80 | 30*2 | 18 | 16.3 | ||||
XCMD650 | 650 | 1000 | ≤60 | ≤10-25 | 30-80 | 45*2 | 12.3 | 10.5 |
1500 | 50-100 | 55*2 | 18.5 | 16 | ||||
2000 | 60-160 | 75*2 | 23 | 21 | ||||
2500 | 75-220 | 90*2 | 28 | 25 | ||||
XCMD750 | 750 | 1000 | ≤70 | ≤10-30 | 50-150 | 55*2 | 23 | 21 |
1500 | 80-180 | 75*2 | 26.5 | 24.5 | ||||
2000 | 100-200 | 90*2 | 30 | 27.2 | ||||
2500 | 120-250 | 110*2 | 33.8 | 30.8 | ||||
XCMD850 | 850 | 1000 | ≤75 | ≤10-30 | 100-220 | 75*2 | 26 | 23.5 |
1500 | 200-400 | 90*2 | 31.5 | 28.5 | ||||
2000 | 300-500 | 110*2 | 36 | 33 | ||||
2500 | 350-650 | 132*2 | 39 | 36 | ||||
XCMD1000 | 1000 | 1000 | ≤100 | ≤10-30 | 250-450 | 90*2 | 46.8 | 41 |
1500 | 350-550 | 110*2 | 52 | 46.2 | ||||
2000 | 500-700 | 132*2 | 58 | 52.5 | ||||
2500 | 650-800 | 160*2 | 65 | 60 | ||||
XCMD1200 | 1200 | 1500 | ≤120 | ≤10-30 | 350-900 | 160*2 | 81 | 73 |
2000 | 450-1000 | 185*2 | 93 | 85 | ||||
2500 | 600-1200 | 220*2 | 106 | 98 |
Production Market