Small Production Jaw Rock Crusher Primary Crushing Durable Jaw Crusher
Equipment Description
Jaw Rock crusher, also known as jaw breaker or jaw crushers, is a major type of rock crushing equipment used primarily in the mining and quarrying industries. This machine has been designed to crush large rocks into smaller ones for further processing.
The jaw crusher is comprised of two jaw plates; one is fixed while the other moves back and forth. The material is initially fed into the top of the machine by an inlet and then crushed between the two plates. Once the material has been reduced in size, it is discharged from the bottom of the machine.
Working Principle
The European version jaw crusher mainly consists of a frame part, an eccentric shaft rotating part, a crushing chamber working part, a safety device, a discharge port adjustment device, etc.
The crushing method of the European version jaw crusher is a curved extrusion type. The electric motor drives the belt and pulley, causing the moving jaw to swing up and down through an eccentric shaft. When the moving jaw pushes the moving jaw plate towards the fixed jaw plate, the material is crushed or chopped. When the moving jaw and the moving jaw plate retreat under the action of the eccentric shaft and spring, the previously crushed or split material is discharged from the lower discharge port of the jaw plate. With the continuous rotation of the electric motor, the crusher jaw periodically crushes and discharges materials, achieving mass production.
Device Details
1. The model of this Jaw Rock Crusher is XCE5013.
2. The feeding port size of this Jaw Rock Crusher is 500*1300mm.
3. The maximum feed side length of this Jaw Rock Crusher is 425 mm.
4. The adjustment range of the discharge port of this Jaw Rock Crusher is 50-120mm.
5. The production capacity of this Jaw Rock Crusher is 50-150 tons per hour.
6. The motor power of this Jaw Rock Crusher is 90 kilowatts.
7. The weight of this Jaw Rock Crusher is 15.6 tons.
Parameters Table
Model | Feed port size (mm) | Maximum feed particle size (mm) | Adjustment range of outlet (mm) | Production capacity (t/h) | Power (kw) | Rotating speed (r/min) | Weight (t) |
XCE2540 | 250*400 | 210 | 20-80 | 5-20 | 15 | 300 | 2.8 |
XCE4060 | 400*600 | 340 | 40-100 | 16-54 | 30 | 275 | 6.5 |
XCE5075 | 500*750 | 425 | 50-100 | 30-85 | 55 | 275 | 10.3 |
※XCE40108 | 400*1080 | 340 | 40-100 | 30-100 | 75 | 250 | 10.8 |
※XCE5013 | 500*1300 | 425 | 50-120 | 50-150 | 90 | 275 | 15.6 |
※XCE5015 | 500*1500 | 425 | 50-120 | 60-185 | 110 | 275 | 18.3 |
※XCE5712 | 570*1200 | 475 | 50-130 | 80-210 | 132 | 275 | 17.8 |
XCE6090 | 600*900 | 500 | 65-160 | 50-150 | 75 | 250 | 15.5 |
XCE75106 | 750*1060 | 630 | 80-140 | 50-208 | 110 | 250 | 27.5 |
XCE9012 | 900*1200 | 750 | 95-165 | 100-238 | 132 | 200 | 50 |
XCE1012 | 1000*1200 | 850 | 105-175 | 295-350 | 160 | 200 | 52 |
XCE1215 | 1200*1500 | 1020 | 150-300 | 300-800 | 220 | 180 | 100.8 |
Equipment Advantage
1. It has a wide range of applications and can break hard rock.
2. The performance is very stable, wear-resistant and durable.
3. The equipment structure is relatively simple and the maintenance cost is low.
Finished Product
Delivery Chart
Factory Information Display