Roof Tile Roll Forming Machine

With Light Weight for Modern Architecture Roofing

Quick Detail

• Rll station: 11 stations
• Transmission: by chain 1.0 inch single line
• Lift power: 10Mpa

Composition of machine

Roll forming main machine…………………………….1 unit

Control panel……………………………………………1 unit

Hydraulic station…………………………………… ….1 unit

Out table…………………………………………………1unit

Spare tools……………………………………………...one box

Details of each composition

Roll forming main machine

• Coil width: 280mm,
• Finished product width: 136/136mm, height:136mm
• working speed: 12m—16m/min (not contain cutting )
• Roll station: 11 stations
• Material of roller: 45＃steel, polished and coated with chrome
• Material of main shaft:45﹟steel diameter roller: Ф70mm
• Main power: 5.5kw drive Brand: GuoMao
• Morming thickness: 0.35mm—0.42mm color steel and galvanized steel350Mpa-550Mpa
• Transmission: by chain 1.0 inch single line
• Hydraulic station power: 3KW
• size of machine (roll forming part):6000x1000x1000(mm) L x W x H
• Weight: about4000Kgs
• Color of machine: blue and yellow
• 13: Cutting:

1. Machine adopt hydraulic after cutting
2. Cutting after forming: Cut the sheet after roll forming to required length
3. Cutting motion: The main machine stopped when cutting
4. Material of blade: CR12with heat treatment 2 sets, hardness 60-62 degree
5. Length measuring: Automatic length measuring
6. Tolerance of length: 10m+/- 2mm
7. Cutting pressure: 10Mpa
8. Coil car motor power: 3KW
9. Lift power: 10Mpa

Control panel Mitsubishi

• Voltage, Frequency, Phase:415 V, 50 Hz, 3Phase
• Automatic length measurement:
• Automatic quantity measurement
• Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
• Length inaccuracy can be amended easily.
• Control panel: Button-type switch and touch screen
• Unit of length: millimeter (switched on the control panel)
• Can batch roll-multiple lengths and quantity input for a complete job

Other request which base on customer request

• The PLC is an "export version" this is signified with an E on the end of the part number or UL.
• PLC will be FX3U-##MR-ES For relay output.
• Touch screens will be Mitsubishi GT1275, 10.4, with unbuilt Ethernet.
• All control wires will be flexible PVC insulated and rated at 600 volt with wire numbers and
  bootlace connectors
  fitted at each end.
• Wire colour code is to be
  415 phases - red, white, blue
  240 volt control active conductor - red
  240 volt neutral - black
  24 volt dc + - orange
  24 volt dc 0v - gray
  All safety wiring to be violet
• PLC and screen programs are NOT pass word protected.
• Electrical connections between control cab and r/f to be plug male/female connection

The profile drawing

Pictures of machine