Galvanized Steel Metal Composite Floor deck Roll Forming Machine For Metal Flooring Deck

1. Description of floor decking roll forming machine:

• The floor decking roll forming amchine produced the steel decks are flat, high precision within 1.5mm,if you are interest thick raw material ,please contact me.
• Use Delta PLC operating system with stable performance, operation is easy, as long as you set the length and quantity,the PLC can meet your require
• The machine speed is 10-15m/min.

In short,Roof decking floor profiles are typically used as the structural component. The steel decking floor is a cold-formed steel sheet. Metal Decking use in roof and floor systems for supporting the concrete or insulating membrane of a roof. Its design and construction magnify properties of the steel.

2. Technical details of floor decking roll forming machinery:

3. Main components of floor decking roll forming machine

4. Production Flows

Uncoiling the sheet---Infeed guiding--Roll forming---Rectifying the straightness---Measure length---Cutting the panel--panels to the supporter (option: automatic stacker)

5. Advantages

• Our factory have 5 engineers with more than 20 years experience
• We have 30 professional technician
• we have 20 sets advanced CNC production lines to produce the machine rollers
• We have professional designers and professional training,and have professional equipment, in this case we can provide professional machines.

• We are very rigorous in every tiny detail,including raw material and making machines.

6. Application

This machine is widely used in the production of the roof and floor systems. Metal floor decking roll forming machine popular sell in many countries, such as United States, Mexico, Chile, Peru, Australia, Rwanda, Nigeria, Kenya, Dubai, Qatar, Thailand, India, Indonesia, Malaysia, Colombia Coil width before rolling is 1200mm /1220mm / 1250mm. Material common is PPGI material, material thickness common between 0.8-1.5 mm.

7. Product photo

FAQ

Q. Do you sell only standard machines?

A: No, most of our machines are built according to customers specifications, using top brand components.

Q. Will i receive a good machine ? Same with my wanted ?
A: Yes sir/Madam. We will do the machine according to your profile drawing . About the profile drawing, we will confirm with you again before producing your machine. Then, after the machine finished, we will test the machine and guarantee the machine you received is a good machine. Because after you satisfied with the machine, and then you pay balance.

Welcome to inquiry.