Automatic Iron Net Drive Shaft Welding Machine

1. Product description

Automatic iron net drive shaft welding machine is used for making wire mesh. Mainly used for the construction mesh.Welding wire diameter 0.8mm-2.5mm.Welding mesh size 1"-4". Welding width 914-2100(mm).Speed of welding 60-90 times/min. Nominal voltage 380v 3 phase electric 50Hz. Nominal power 80X5 KVA . Exterior size 3100× 1700× 1400.

2. Technical parameter

3. Application area

The automatic iron net drive shaft welding machine can be widely used in construction. For example: the outer wall of the building, concrete and the high-rise buiding. It becomes the widely-using material in the modern time. For the using of this kind of wire mesh, the heat preservation and anti-cracking work of the modern construction can proceed favorablely. For having the good machine, we can make good mesh, then can make good fence. At last, we can have good protection. So wherever in many industries and in our personal life, the automatic electric galvanized roll mesh welding machine has become more and more important.

4. Advantages

a. The mesh roll length can be set by counter switch on the control panel.

b.The welding time and welding current can be adjusted on the control panel to guarantee solid welding.

c. At the same time, the machine is also equipped with automatic cutting mesh machine, when the machine finishes the mesh length according to the setting parameters, the mesh will be cut by the cutting mesh machine automatically.

d. Mesh pulling system adopts servo motor back and forward to ensure the mesh opening accurately and can be adjusted freely within a certain range.

e. We are engaged in wire mesh welding machine for more than 20 years, providing you with the most professional knowledge and the most
suitable machine.