PP materials plastic construction formwork building hardware making machinery

1. The best toughness
Can be used to make other different shapes and size formworks.Bending strength:Lateral pressure 14Mpa , Vertical pressure 21Mpa .Bending modulus:Lateral pressure 782Mpa ,Vertical pressure 970Mpa.

2. Waterproof-hollow design
Hollow design make the formwork structural stability .Dimensional shrinkage under heat:lateral 0.15% Vertical 0.13% .Diffcult deformation, no mildew; Long-term immersion stratification in the water, no bubbles, sheet size stability, especially suitable for underground and damp environment.

3. Acid and alkali resistance, corrosion resistance
Very suitable for the engineering application in coastal areas, mine, as well as seawall. It is need not do any preservative treatment both in using and storing the formworks, which do not pollute the concrete surface.

Installation instructions:

• 1, Use the hollow building formwork intersecting surface laid with 15 mm thick.

• 2, Wood square of the distance :

• 1, On the surface of the intersection (spacing: wood square distance according to the thickness of the slab concrete, in general, the thickness of less than 0.15 m floor (spacing is 200 ~ 250 mm.

• 2, The shear wall (spacing: (spacing according to adjust the spacing, height and thickness of the wall to wall height of 2800 mm, 300 mm thick wall, for example, using the formwork (15 mm thickness spacing is 100 ~ 150 mm, if the shear wall, pillar width more than 1 meter, must add the fixed frame.

• 3, When the nail to the formwork from the formwork edge distance 15 ~ 30 mm, strength wants moderate, nail nails is 40 ~ 50 mm in length, shoulds not be too long or too short.

• 4, Beam bottom of a piece of wood square must set aside 15 mm seam allowance, wallboard made on wood square seam allowance, it does not leak slurry and wallboard material saving.

Features of plastic construction formwork:

Advantage:

FAQ
1.Q: Are you manufacture factory or a trader?

A: We are an industrial manufacture factory of plastic extrusion machinery for years, which locates in Zhangjiagang city, China.

2.Q: What's your payment term:

A: T/T 30% in advance & T/T 70% upon sending the copy of Bill of Lading, L/C 100%, or negotiate according to the order status.

3.Q: Can we visit your factory ?

A: Warmly welcome. Once we have your schedule, we will arrange the professional sales team to follow up your case

4. Q: How do you make the quotation for clients?

A: The price depends on quality and performance but the clients should be satisfied first.

5. Q: Do you have any after-sale service ?

A:Yes,we have professional after-sale teamwork . any technical question could be solved in 24 hours by our after-sale teamwork.

6. Q: How do you install your equipment in our factory ?

A: We have professional after-sale &installation teamwork, we will arrange our engineer fly to ur factory install and teach ur labor .

Our Packing and Shipping

Our exhibition