Roofing ridge cap forming machine, ridge cap tile roll forming machine, metal ridge cap panel

Brief Introduction:

There are different roof flashing roll forming machines based on different technical requirements on the final products, however, in the market people most of time use three kinds of roof ridge cap roll forming machines. Roof ridge caps with pressed STEPs, Roof ridge cap without steps, and V shaped roof flashing without STEPs. It has to be pointed out that a roof ridge caps without STEPS sometimes can be used both as roof ridge caps and as roof valley flashings. In addition, there is a similar machine, Glazed Tile Roll Forming Machine.

There are not so many differences between these two kinds of roof ridge cap roll forming machines, except for different roller stations, different rolling tools, and what really makes different is hydraulic Pressing equipment which makes continuous STEPs on roof ridge caps.

Quick Detail:

1. Thickness : 0.4-0.6mm
2. Material : pre-painted steel
3. Input width :457mm
4. Material weight : 3Tons
5. Coil inner diameter : 480mm
6. Driven way: by driven motor
7. Cutting way: no waste cut, stop to press, stop to cut
8. Cutting tolerance : ±1mm

Machine list:

1. 3T*600mm hydraulic & driven un-coiler
2. Roll former
3. Hydraulic cutting device
4. Run out rack
5. PLC control system

Description/Technical Parameter details of complete line:

• 3TX600mm Hydraulic Un-Coiler

Hydraulic system for expansion coil-inner-hole with 4 palms

Link-connect expanding system

Pump power=1.5KW

Frequency Inverter to regulate turning speed: Motor: 2.2KW

Load capacity=3Ton;

Coil Inner – diameter =451-530mm

Coil outer-diameter=Max.1500mm

Coiler Width=Max.600mm

Driving motor to turn the coil

Limit switch for auto stop/start device

• Entry bench and manual pre-shearing device
• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, 3 units

Profile Drawing/Layout/Equipment reference pictures: