828 classic model type roof sheet glazed tile roll forming machine, roofing tile forming machine

Quick Detail:

1. Thickness : 0.4mm-0.6mm
2. Material : High quality pre-painted coil
3. Input width : 914mm
4. Effective width: 828mm
5. Material weight : 5MT normally
6. Coil inner diameter : 508mm
7. Driven way: by driven AC motor or Siemens motor with gear box on each stage to improve the precision
8. Pressing stair distance tolerance : ±0.5mm
9. Cutting tolerance : ±1mm

Application:

Metal step roof tiles produced by glazed tile roll forming machine from high quality pre-painted sheets most time apply as roofing on Villas or some residential buildings.

There is only one but key difference between a metal glazed roof tile and a regular metal roof panel: Steps! Generally speaking, a regular metal roof panel with steps is called a metal glazed roof tile!

Machine list:

1. Hydraulic un-coiler or manual de-coiler rack
2. Roll former
3. Hydraulic stair pressing device
4. Hydraulic cutting device after step tile pressing
5. Run out rack
6. PLC control systems

Description/Technical Parameter details of complete line:

• 5TX1250mm Hydraulic Un-Coiler with coil car

Hydraulic system to expand coil inner hole, Pump motor: 3KW

Coil Inner-diameter= 510±30mm

Load Capacity: Max. 5 Tons, Coil Width Max. 1250mm

Taper wedge expand type

Driving motor to turn the coil, 3KW

• Entry Roller & Manual Pre-shearing device (Un-powered)

Smart cut control

To cut off the end of the final piece of sheet only

Working thickness: max. 0.6mm

• Roll forming machine with stair-drawing and cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Control the quantity, drawing length (250-350mm) & cutting length (min.800mm) automatically.

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, 3 units

Profile Drawing/Layout/Equipment reference pictures: