Big wave roof corrugated machine , 780mm cover width

Quick Detail:

1. Thickness : 0.4-0.8mm
2. Material : G345-550, pre-painted sheets
3. Input width : 1250mm
   1. Effective width: 980+/-4mm
   2. Material weight: 5MT
   3. Coil inner diameter : 508mm
   4. Driven way: by 7.5KW driven motor
   5. Cutting way: by 4kw hydraulic power pack
   6. Cutting tolerance : ±1mm

Machine list:

1. Hydraulic un-coiler with/without coil car
2. Entry bench & Manual pre-shearing device
3. Roll forming machine
4. Hydraulic cutting device
5. Product Rack
6. PLC control systems

Description/Technical Parameter details of complete line:

• 5TX1250mm hydraulic de-coiler

Hydraulic system to expand coil inner hole, Pump motor: 3KW

Driving motor to turn the coil, 3KW,

Manual frequency speed control

Coil Inner-diameter= 510±30mm

Load Capacity: Max. 5 Tons

Coil Width Max. 1250mm

Taper wedge expand type

• Entry Roller & Manual Pre-shearing device (Un-powered)

Smart cut control

To cut off the end of the final piece of sheet only

Working thickness: max. 0.8mm

• Roll forming machine details as below table :

• Hydraulic Cutting Device

Stop to cut, Post cut, No Blanking cut

Cutting tool material: Cr12, Heat treatment

Hydraulic Group, Pump motor =4KW

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, 3 units

Brief Introduction:

Compared to traditional clay tiles, stone or brick cladding, corrugated sheets give a traditional look, yet weigh lighter and have longer life circle. In fact, corrugated metal roofing is the only cladding that should be used in conservation areas.

To sum up, there are regular corrugated sheet roll forming machine and special usage corrugated sheet machine.

Profile Drawing/Layout/Equipment reference pictures: