Galvanized steel cable tray roll forming machine, full automatic change, cable tray forming machine

Quick Detail:

1. Thickness : 1.5-3.0mm
2. Material : GI
3. Input width: as per order
   1. Effective width:
   2. Material weight: 5MT cap.
   3. Coil inner diameter : 508mm
   4. Driven way: by driven motor
   5. Cutting way: by hydraulic power pack
   6. Cutting tolerance : ±1mm

Application:

There are many sizes and many regular holes for cable trays, so how to change the size and how to punch the holes is the main issue when the manufacturer design the machine

Nowadays, more and more adopt to un-coiler, independent pre-leveling device, servo feed in device, presser with different punching dies, roll former, stop to cut or flying cut device, no power run out rack or pneumatic stacker, PLC control systems as complete lines to improve the production speed largely

Machine list:

1. Un-coiler
2. Independent pre-leveling device
3. Professional lubrication device
4. Auto servo feed in device
5. Presser with different punching tools
6. Roll former
7. Stop to cut cutting device
8. No power Rack
9. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

• 2 Tons Hydraulic Un-coiler with pre-leveling device

Hydraulic system to expand coil inner hole, four palms

Motorized driving coil rotation, auto stop/start control, 2.2KW

Load capacity=2Ton

Coil width: 200mm

Coil Inner-diameter: Φ510±30mm

Snubber arm driven by pneumatic cylinder

• Independent pre-leveling device

For heavy gauge material

Driven and level by motor

• Professional Lubrication device

Equipped between the roller feeder and the press

Lubrication for punching tools and the roll former

• Auto Feed in Device

Servo motor: YASKAWA, 1.8KW or as order

• Presser

Capacity: 80 tons or as per detailed requirement

Chinese Brand: YANGLI

• Roll Forming machine

Wall plate frame design, thickness of wall plate is 18mm

18 stages to form

Rollers manufactured from Cr12, heat treatment

Shafts Diameter=ф75mm, Precision Machined

Main motor =11KW, Frequency speed control

Max. line speed of roll former:Approx. 12-15m/min

• Hydraulic cutting device

Stop to cut

After cut off, there are 8mm material waste

• PLC Control System

Siemens brand PLC and touch screen, Schneider brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

• Run-out Rack

Rack length as per product length

Profile Drawing/Layout/Equipment reference pictures: