Purlin roll forming machine with flying cut, 4mm thick, heave gauge pulin, non – stop cut

Application:

C and Z steel purlins are necessary for the modern steel industrial buildings, and some residential building as well, and various kinds of c/z purlin roll forming machines have been developed to produce C/Z/U steel purlins.

In accordance with different requests for C and Z steel purlins, in the markets there are c purlin roll forming machines for the production of C steel sectional channels, z purin roll forming machines for the manufacturing of Z shaped channels and interchangeable c/z purlin roll forming machines which are designed to produce both C and Z steel purlins without replacing any rolling tools or cutting dies.

To improve the speed, there are flying cut design means non-stop to cut design, the machine no need reduce the speed to stop to cut and improve the production speed highly

Quick Detail:

1. Thickness : 2mm-4mm
2. Material : Galvanized sheets
3. Material weight : 5Mt
4. Coil inner diameter : 508mm
5. Driven way: by 22kw driven motor
6. Cutting way: by non-stop cutting device
7. Cutting tolerance : ±1mm

Machine list:

1. Hydraulic De-coiler
2. Pre-leveling device
3. Roll former
4. Simple cooling systems
5. Flying cutting device
6. Run out table or automatic stacking device
7. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

• 8TX500mm Hydraulic Un-coiler

Hydraulic system to expand coil inner hole, Pump motor: 3KW

Coil Inner-diameter= 510±30mm.

Coil Outer-diameter Max. 1600mm

Load Capacity: Max. 8Tons;

Coil Width Max. 500mm

Taper wedge expand type instead of Link-connect expanding system

Driving motor with gear box with brake to turn the coil, 5.5KW,

Manual frequency speed control

Inverter brand: Delta, Taiwan brand

Hydraulic pressing arm for top holder, to avoid coil become loose when stop to be packed

Support arm at the end of the shaft to for stable loading/running

5 Tons coil car

Up/Down stroke of Coil Car: Max. 300mm

Forward/backward stroke of Coil Car: Max. 1000mm

• Pre-Leveling Device

Pre-Level Device with 4 over 3 shafts to remove the Coil-set

Share the same motor with the roll former

• Roll forming machine with cutting details as below table :

• PLC Control System

Control the quantity & cutting length automatically

Combined with: Siemens brand PLC and Touch Screen

Yaskawa brand Servo motor driver (Yaskawa),

Schneider brand Inverter, Omron encoder, etc

Cut-to-length tolerance≤±1mm

Control voltage 24V

• Product Rack 4 meter long ,rolled type

Profile Drawing/Layout/Equipment reference pictures: