Rolled making machine with LOGO pressing/ punching/ notching, sigma/ omega panel available

Quick Detail:

1. Thickness : 1.0-1.5mm
2. Material : GI sheets, 245Mpa
3. Coil width: 411/550mm
4. Material weight : 5Mt
5. Coil inner diameter :510mm
6. Driven way: by 15kw*2 driven motor
7. Cutting way: by stop to cut design
8. Cutting tolerance : ±1mm

Machine list:

1. Hydraulic De-coiler
2. Pre-leveling Device
3. Hydraulic Pre-punching device
4. Roll forming machine
5. Hydraulic Punching Post- cut device
6. Run out table
7. PLC control systems

Description/Technical Parameter details of complete line:

• 5TX600mm Hydraulic Un-coiler or manual de-coiler

Un-powered; Load capacity= MAX.5Ton

Hydraulic system to expand coil inner hole, Pump motor: 3KW

Coil inner–diameter=510+/-30mm

Coil Width= MAX.600mm

Mandrel rotation: Draft type

Or as the budget, the user can also adopt to the driven motor to push the sheets

• Pre-Leveling Device

Pre-Level Device with 4 over 3 shafts to remove the Coil-set

Share the same motor with the roll former

• Hydraulic Pre-punching device

Share in the same hydraulic group with post cut

1. Punching the order holes
2. Press the LOGO as required
3. Roll forming machine details as below table :

• PLC Control System

Control the quantity & cutting length automatically

Combined with: Siemens brand PLC and Touch Screen

Schneider brand Inverter, Omron encoder, etc

Cut-to-length tolerance≤±1mm

Control voltage 24V

• Product Rack 4 meter long ,rolled type

Application:

This profile is with many different holes as request

It consist of de-coiler, pre-leveling, hydraulic pre-punching device, roll forming machine, punching/LOGO pressing/cutting device and run out rack and PLC control cabinet

Profile Drawing/Layout/Equipment reference pictures: