1

2

5T Hydraulic Un-coiler

• Steel coil width: 550 mm;
• Internal diameter of coil: variable, from 470 mm to 520 mm
• Maximal out diameter:1200mm
• Maximum coil weight: 5000 Kg;
• Feeding motor: 5.5kw
• Expansion by hydraulic
• Hydraulic power: 4kw
• Quantity: 1

Punching system

• Base on customer provide punching drawing, this machine need adopt two units hydraulic punching system before roll forming.
• The punches and dollies will be CR-12, hardness HRC 58-62 and chrome coating.
• Hydraulic power: 5.5kw

Main Roll Forming Machine

• Roll station:17 stations+ one station of rectify
• Roller material:Gcr15, 58-62,HRC hardness and chrome plated surface
• Shaft diameter: ￠70mm material: SAE1045
• Main power: 15kw

Machine structure:

• Main frame by 350H beam welding
• Machine structure: wire electrode cutting system
• Drive by chain

Hydraulic cutting system

• Machine adopt hydraulic post cutting system.
• Cutting power by hydraulic, 5.5KW
• Cutting after forming: Cut the sheet after roll forming to required length
• Cutting motion: The main machine will stop when cutting, after the motion the machine will continue automatically.
• Material of blade:Cr12 with heat treatment 58-60°
• Tolerance of length: 3000mm+/- 1.5mm

Hydraulic System

• Hydraulic power: 5.5kw

• Solenoid valve: 1 group
• Hydraulic oil: 46# hydraulic oil

Computer Control Cabinet

• Programmable setting of profile length and quantity
• Operating system language: English and Chinese
• Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
• Length inaccuracy can be amended easily.
• PLC brand: Panasonic

Out table

• Jointed by steel tube
• Size: about 2.0m long*0.8mwide*0.6-1mhigh
• One out table with three support roller
• Quantity: 2 units