Small Scroll Type Water Source Heat Pump Unit
●Advanced technology, using a variety of advanced air conditioning technologies, such as multi-energy regulation, unique heat pump
Built-in heat recovery technology, efficient and accurate water side antifreeze technology of the unit.
●The unit adopts high-efficiency fully enclosed scroll compressor, horizontal multi-stage centrifugal pump, fully enclosed structure shell. Low noise, stable operation.
●Digital centralized control, accurate and efficient.
●Complete protection, safe and reliable.
●Simple installation and complete functions.
●Clean and environmentally friendly, high efficiency and energy saving.
Technical paramater:
Unit model (GSHP) | 4.5GAF | 6.5GAF | 10GAF | 12GAF | 16GAF | 20GAF | 25GAF | ||
Cooling capacity | kW | 4.5 | 6.5 | 9.8 | 12 | 16 | 20 | 25 | |
Heating capacity | kW | 5.22 | 7.54 | 11.4 | 14.3 | 18.8 | 23.3 | 29 | |
Power supply | 1Ph 220V 50Hz | 3Ph 380V 50Hz | |||||||
Refrigerant | R410A | ||||||||
Compressor | Cooling input power | kW | 0.8 | 1.17 | 1.75 | 2.2 | 2.85 | 3.5 | 4.3 |
Heating input power | kW | 1.21 | 1.76 | 2.64 | 3.32 | 4.3 | 5.28 | 6.48 | |
Maximum operating current | A | 4.5 | 5.6 | 8.8 | 9.5 | 10.8 | 12.8 | 15.5 | |
Use side heat exchanger |
Water side resistance | kPa | 35 | 42 | 47 | 49 | 42 | 43 | 44 |
Water flow | m3 /h | 0.9 | 1.3 | 1.96 | 2.46 | 3.23 | 4.01 | 4.99 | |
Heat side heat exchanger |
Water side resistance | kPa | 20 | 22 | 23 | 25 | 22 | 21 | 23 |
Water flow | m3 /h | 0.49 | 0.71 | 1.08 | 1.35 | 1.78 | 2.21 | 2.76 | |
Overall | Length | mm | 960 | 995 | 995 | 995 | 1106 | 1106 | 1216 |
Width | mm | 497 | 630 | 630 | 630 | 674 | 674 | 840 | |
Height | mm | 920 | 950 | 950 | 950 | 970 | 970 | 1050 | |
Unit net weight | Kg | 115 | 160 | 165 | 180 | 200 | 250 | 290 | |
Unit model (GSHP) | 30GAF | 38GAF | 43GAF | 50GAF | 56GAF | 65GAF | 75GAF | ||
Cooling capacity | kW | 29.6 | 38 | 43 | 50 | 55.8 | 65 | 74.4 | |
Heating capacity | kW | 34.4 | 44.5 | 52.2 | 58 | 64.7 | 78.3 | 86.3 | |
Power supply | 3Ph 380V 50Hz | ||||||||
Refrigerant | R410A | ||||||||
Compressor | Cooling input power | kW | 5 | 6.4 | 7.4 | 8.5 | 9.5 | 11.1 | 12.6 |
Heating input power | kW | 7.2 | 9.65 | 11.2 | 12.8 | 4.3 | 16.7 | 19 | |
Maximum operating current | A | 30 | 31 | 32 | 27 | 37 | 40 | 51 | |
Use side heat exchanger |
Water side resistance | kPa | 43 | 45 | 46 | 40 | 42 | 44 | 46 |
Water flow | m3 /h | 5.66 | 6.79 | 7.84 | 9.3 | 10.5 | 12.4 | 14.5 | |
Heat side heat exchanger |
Water side resistance | kPa | 24 | 24 | 25 | 24 | 25 | 25 | 26 |
Water flow | m3 /h | 3.17 | 3.76 | 4.36 | 5.12 | 5.85 | 6.93 | 8.09 | |
Overall | Length | mm | 1346 | 1346 | 1346 | 1525 | 1525 | 1525 | 1525 |
Width | mm | 840 | 840 | 840 | 940 | 940 | 940 | 940 | |
Height | mm | 1050 | 1050 | 1050 | 1050 | 1050 | 1150 | 1150 | |
Unit net weight | Kg | 300 | 330 | 375 | 450 | 460 | 540 | 560 |
1) The cooling capacity of the unit and the power consumption calibration conditions of the compressor: evaporator inlet and outlet water temp (12/7°C), condenser inlet and outlet water temp(18/29°C)
2) Calibration conditions for heat generation and compressor power consumption: evaporator inlet and outlet water temp (15/8°C), condenser inlet and outlet water temp (40/45°C)
3) The standard pressure-bearing capacity of the condenser and evaporator water circuit is 1.0MPa, and the fouling factor: 0.086 ㎡°C/kW
4) If the specifications listed in this table change, please excuse for no notice
Note: Partial heat recovery type and full heat recovery type are optional.