Hollow Shaft Slip Ring with No Packet Loss and Low Return Loss Smooth Running
Description
The USB slip rings is another important slip ring specially designed for USB signals.Used for transmitting the signal of USB1.0, USB2.0, and USB3.0. With steady transmission, no packet loss, no string of code, return loss is small, low insertion loss, etc.
It helps a lot in communicating data transmission between the rotating platform and a stationary platform. It provides the best technical solution to the large-capacity data system connected between the rotating members.
Specification | |
Circuits | 1-24 circuits |
Operating Speed | 0-500rpm |
Working Temperature | -20℃~ +60℃ |
Working Humidity | 60%RH or higher |
Electrical: | |
Voltage Rating | 380VAC/DC or higher |
Current Rating | 2A/5A/10A/15A per circuit |
Dielectric Strength | ≥1000V@50Hz between each circuit |
Insulation Resistance | 1000MΩ@ 500VDC |
Electrical Noise | 1mΩ Min |
Mechanical: | |
Contact Material | Precious metal |
Lead Wire Length | Standard 300mm (11.811inch) |
Housing Material | Aluminum alloy |
Torque | ≤9.25 g·m (for reference ) |
Protection | IP54 or higher |
Product display