3 Poles High Voltage Slip Ring with 30 amps Electrical Interface for Wind Turbine Use
Wind Turbine Slip Ring
Quick Detail
LPW-02 Wind Turbine Slip Ring This unit can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
Specifications
Specification | |
Poles | 3 |
Operating Speed | 0-300rpm |
Working Temperature | -35℃~ +50℃ |
Working Humidity | 60%RH or higher |
Electrical: | |
Voltage Rating | 1000VAC/DC or higher |
Current Rating | 30A per circuit |
Dielectric Strength | ≥500V@50Hz between each circuit |
Insulation Resistance | 1000MΩ@ 500VDC |
Electrical Noise | 1mΩ Min |
Mechanical: | |
Contact Material | Carbon Brush |
Lead Wire Size | High-TemperatureResistant Material |
Lead Wire Length | Standard 250mm(9.843inch) |
Protection
| IP43 or higher |
Dimensions
Application Picture