70mm Hore Size Design Through Bore Electrical Slip Ring 15A 38mm 6 Circuits
Along with the advance modern science and technology, the requirements for the types of slip ring becomes more and more diversification. The slip ring can not only transmit power signal, also need to transmit Frequency, Fiber optic, Gas, Fluid and hybrid model. JINPAT has the slip ring specialized in designing the fluid rotary joint to transmit kinds of fluid. The hydraulic part is protection class is IP65 or higher with the precious metal contact material.
The 70mm unobstructed through-bore provides routing space for hydraulics, pneumatics or for a concentric shaft mount. The LPT070 uses our fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force per fiber and low contact wear rates. In addition, fiber brushes do not require lubrication and produce virtually no wear debris. The LPT070 features field serviceable brush blocks.
LPT070-0610 through bore slip ring features 6 wires and 10 A per ring ,it is sure that we can coustomize for you to routing to transmit Frequency, Fiber optic, Gas, Fluid etc.
Specification | |
Circuits | 6circuits (1-24 circuits module optinal) |
Operating Speed | 0-400rpm |
Working Temperature | -20℃~ +60℃ |
Working Humidity | 60%RH or higher |
Electrical: | |
Voltage Rating | 380VAC/DC or higher |
Current Rating | 10A per circuit( 2A/5A/15A optinal)
|
Dielectric Strength | ≥800V@50Hz between each circuit |
Insulation Resistance | 50MΩ@ 500VDC |
Electric Noise | ≤30mΩ Min |
Mechanical: | |
Contact Material | Precious metal |
Lead Wire Length | Standard 300mm (11.811inch) |
Housing Material | Aluminum alloy |
≤9.25 g·m (for reference ) | |
Protection | IP44 or higher |
Advantage of JINPAT slip ring: