18 Circuits 250 Rpm Capsule Slip Ring Custom Solutions Available, Mass Production
Bomb disposal is one of the most difficult task for human beings, which might breed many dangers. So bomb disposal robots are developed to assist human in such task. In fact, bomb disposal robot is actually a kind of unmanned vehicle that still need human to operate outside of the field. A bomb disposal robot is usually loaded with a high definition camera that helps to detect the environment. Such device should be allowed to rotate in 360-degree so as to provide a full-round view of the surroundings. And most importantly, the robot arm is the key to conduct the actual dismantling of a bomb. To enable a flexible and accurate movement of the robot arm, a slip ring is needed.
JINPAT Electronics is a slip ring manufacturer with abundant experience in producing slip rings for various purposes. As for bomb disposal robots, JINPAT also provides unique solutions.
JINPAT optoelectronic slip ring is a good choice to connect the high definition camera with the robot body. JINPAT LPT000-6402-E3-FO01 is able to transmit power and optical signals. So it is able to transmit angle signal to control the movement of the camera head while transmitting the high definition video signals back to the processor. It consists of two mules, namely the electrical module and the optical module. For the former unit, there are 64 2A power channels and 1 Gigabit Ethernet channel. As for the latter, it adopts a single mode optical rotary joint with 1 channel. With the assistance of this optoelectronic slip ring, the bomb disposal robot can capture a vivid and all-round view of the site.
Specifications | |
Operating Speed | 0-250 rpm |
Circuits | 18 |
Voltage | 240 VAC/DC |
Singals | 1*Gigabit Ethernet, 1*TRIG signal, 1*BUS signal, 1 *ACAP and 1 *ABUS |
Temperature Range | -20℃ to +60℃ |
Contact | Gold to Gold |
Lead Size | 30# silver plated copper |
Lead Length | Standard 250 mm (9.843inch) |
Dielectric Strength | ≥500 VAC @50Hz, between each circuit |
Insulation Resistance | 1000 MΩ @ 500 VDC |
Electrical Noise | 1mΩMin |
Capsule Length =L | ||
# of Circuits | L (mm) | Part No |
18 | 23.5 | LPM-18C |
Dimension
Product Display