12.7mm IP54 Through Hole Slip Ring Rotating Assembly
LPT Series through bore slip ring is a rotating assembly used to transfer power, control circuits, or data (analog / digital) from stationary inlets to rotating outlets.
LPT Series slip rings,The use of advanced fiber brush ensures reliable contact under extremely low friction. The center hole is available from 0 to 1000mm. The current is from mA to 5000 amps. The voltage can be up to 10000 volts, which can fully meet different needs of transmission.
Through-bore slip rings (the center hole can pass through the drive shaft, gas-liquid passage; it can also integrate high frequency, fiber, encoder, waveguide, gas and liquid and other joints).Need a combined fluid and electrical solution? We offer complete fluid rotary union and electrical slip ring integrated packages.
Electronic & Electruc | Mechanical | |||
Circuits | Total | 6 CKT | Working Speed | 0~2000rpm |
Detail | 6X2A | Inner Diameter | Φ12.7mm | |
Rating Voltage | 240VAC | Contact Material | Gold-Gold | |
Dielectric Strength | 500VAC@50Hz | Housing Material | Aluminum Alloy | |
Insulation Resistance | ≥300MΩ@300VDC | Lead Wire Length | Stator:300mm Rotor:300mm | |
Environment | Remarks | |||
Working Temperature | -20°C~+125°C | Application | / | |
Working Humidity | ≤60%RH | Other | / | |
IP | IP50 | Note:"P" stands dor power, "S" stands for signal |
Product outline drawing
product picture