China Rotomold Tooling Supplier ADblue Tank Mould Customize Different Sizes Rotomolding Adblue Tank Mould

Technical Parameters:

YOUGE custom Plastic Tank Rotoplastic molding, also known as rotary molding, is to load a quantitative powder resin into a cold mold. The mold is driven by a rolling machine to rotate and rotate slowly around two vertical rotating axes, while the mold is heated by an external heat source, so that the resin powder is melted and evenly coated on the surface of the entire mold cavity with its own gravity. Finally, the method of hollow product is obtained after cooling and demoulding. Compared with the extrusion, injection molding and blow molding processes often used in plastic molding, the rotoplastic process is more suitable for the production of large and medium-sized or complex plastic products, and the product has almost no internal stress and other advantages.

advantage:

(1) Low cost, the same size of the product, the cost of rotoplastic mold is about 1/3 to 1/4 of the cost of blow molding and injection mold.

(2) The product is formed once by rotoplastic process, acid and alkali resistance, corrosion resistance, wear resistance, fall resistance, easy to clean, good sealing, and can protect the product contents from damage.

(3) The corners of the products formed by the special process are 15%-20% thicker than the surface, and there is almost no material return in the production process, and the rotomizing process has a high material utilization rate.

(4) Good air tightness, high toughness, high resilience, to ensure no deformation.

(5) Rotoplastic products can be filled with foam materials to achieve thermal insulation and refrigeration.

(6) Simple maintenance, long service life, comprehensive use of cost-effective.

(7) Positioning foamed plastic buffer damping system, vibration, vibration conditions to ensure the safety and reliability of the carrier.

certificate

YOUGE is an ISO certified company. Quality is our standard.