RHHQ10 Mixer: Sensor Weighing, Hydraulic Drive, Anti-Winding, High Strength, Leak-Proof Sealing

RHHQ10 Mixer consists of a horizontal cylinder and a spindle arranged along the axis of the cylinder. The main shaft is driven by hydraulic pressure, and the paddle arms and blades of axial flow and radial flow stirring designed by the professional gravity model can make the internal materials back-mix, cross-flow, and fully mix. The pre-crushed material enters the mixer through the top of the front end of the mixer, and waste liquid, sludge, etc. are added through the flange interface reserved for the mixer and fully mixed to achieve the effect of homogenization. The materials arriving at the other end of the equipment have been fully back-mixed and cross-flowed, which overcomes the inhomogeneity caused by the materials added in different time periods and achieves sufficient homogenization (the mixer is not only a homogenization equipment, but also a buffer for downstream equipment).

Specification

Features

1. Sensor weighing system, real-time monitoring of material volume;

2. Hydraulic drive, high torque output, strong anti-overload capability;

3. Equipped with an observation window and lighting device, it is convenient to observe the material condition;

4. Single-axis design, dynamic and static spacer anti-winding device, to prevent flexible materials from winding around the shaft;

5. The stirring shaft adopts 40cr quenching and tempering, which has high strength, and the imported sealing combination is not easy to leak;

6. Lined with imported wear-resistant plate, special imported material mixing blade, longer service life;

7. Gravity model simulation design axial flow + radial flow mixing, the mixing speed is faster and the effect is more uniform;

8. Nitrogen gas interface, four-leg weighing system, explosion vent, temperature, and pressure sensor, etc., complete set of safety facilities;