Engraved Designed Of Flower Pots PE Made From Aluminum Rotationally Tools

Our factory devoted in rotational molding industry with many years experiences, professional in aluminum rotational mould

1. we can assure rotomolding product easy to demould without damage in structure.

2. Without air hole/not smooth /defect on surface,

3. flexible design can according to sample/3D drawing/even pictures

4. Short lead time

5. high efficiency open molding time within 35days ,

6. uniform shaping thickness, high precision,product thickness also uniform

7. OEM available

8. rotational plastic molding machine can work diameter 5M product.

9. Lower cost for product assembly,we can assist foreign customer to complete product assembly,saving assembly cost.

10. Good edge strength of product,the thickness is less than 5mm, it won’t easy to damage and improve the safety of product.

11. Adding special function, by adjust product wall thickness and filling in foam to realize temperature/sound insulation,

12. Flexible design for place various of inserts to reduce the cost of reprocessing.

Genernal tools specifications:

1-Foam tooling model as casting patterns. Or, Block CNC machined tools available.
2-Aluminum castings with cast mounting posts. (Nominal 5/16” wall castings).
3-No or minimal porosity, guaranteed not to blow holes.
4-2” wide x 9/16” parting lines.
5-Tongue and groove parting lines, pins design also available.
6-Tongue is on the side that will mount to arm. (So plastic powder isn’t spilled into groove)
7-Two options for texture, 0.8mm/1.5mm shoot blasted. Mat or shiny available.
8-Fabricated frame, minimum (1-1/2” x 1-1/2” mild steel tubing)
9-Spring loaded mounting system available.
10-Heavy duty Clamps designing available.
11- Mild steel lifting hooks available.
12-Teflon treatment available.
13-Required tools shrinkage according customer.