0.5 tons single stage reverse osmosis (RO) water treatment equipment
Parameter Table
Model | Water Making Ability | Inlet Caliber | Effluent Caliber | Blowdown alCer | Size(mm) | Power |
YSRO-0.5T | 0.5m3/h | DN20 | DN20 | DN15 | 1500×600×1500 | 1.3kw |
YSRO-1T | 1m3/h | DN25 | DN25 | DN20 | 1700×600×1500 | 2.1kw |
YSRO-2T | 2m3/h | DN32 | DN25 | DN20 | 2500×1000×1950 | 4.4kw |
YSRO-3T | 3m3/h | DN40 | DN32 | DN25 | 2500×1200×2150 | 4.5kw |
YSRO-5T | 5m3/h | DN50 | DN40 | DN32 | 2500×1350×2150 | 7.0kw |
YSRO-8T | 8m3/h | DN50 | DN50 | DN40 | 3500×1500×2150 | 11kw |
YSRO-10T | 10m3/h | DN50 | DN50 | DN40 | 3500×1600×2300 | 15kw |
Technical characteristics
Low energy consumption: Compared with the same flow of distilled water, the operating cost of reverse osmosis equipment is lower, and the use of high-efficiency, low-noise imported or domestic high-pressure pumps further reduce the operating noise and energy consumption.
Small floor area: the equipment structure is reasonable, the floor area is less, and the space is more than 30% less than the conventional method, which is suitable for the installation environment with limited space.
,
Packaging and transportation
FAQ
3. What is the daily maintenance of water treatment equipment?