High Flow Brackish 3000GPD RO Water Treatment System
RO Water Treatment System Introduction
RO (Reverse Osmosis, RO), the basic working principle is: using of a special high pressure pump, increasing 6-20 kg pressure to raw water, then force raw water penetrating through 0.0001 micro reverse osmosis membrane under the pressure. Only water molecules and solvent less than 0.0001 microns can pass through the RO membrane. Chemical ionization, and bacterial, fungal, virus will flow with wastewater.
RO Water Treatment System parameters
1. Output t: 500L/hour; (actual water output is higher than standard design value)
2. Inlet water source: municipal tap water or ground water etc...
3. Outlet water quality: conductivity is less than 3us / cm(TDS is <2PPM), desanilation rate is 97%
4. Outlet quality meets the standards of the urban construction industry of the People's Republic
5. Rated power: 2000w
6. Rated voltage: 220v or 380v
7. Water pressure: 0.1mpa or more
RO Water Treatment System accessroies
1. Panel flowmeter | 2. Pipe flowmeter | 3. PVC security filter |
4. SS security filter | 5. Manual control valve | 6. Automatic control vlave |
7. Pressure guage | 8. Pressure swith | 9. Quartz sand |
10. Activated carbon | 11. Cation resim | 12. 304 checking valve |
13. Sanitation grade valve | 14. Ball valve | 15. Water solenoid valve |
16. Connecting pipe fittings | 17. Conductivity meter | 18. RO controller |
19. Vontron RO membrane | 20. DOW RO membrane | 21. Lingxiao pump |
22. CNP pump | 23. CNP high pressure pump | 24. PP filter cartridge |
25. Wound filter cartridge | 26. PEFT filter cartridge | 27. SEKO-dosing pump |
RO Water Treatment System Treatment process
Raw water----booster pump---quartz sand filter---activated carbon filter---water softener (optional)---security filter----high pressure pump---RO system---Uv system (optional) ---pure water tank (optional)
RO Water Treatment System Pictures