Double Stage Water Osmosis Ozone Purifying Systems RO Water Purification Plant Reverse Osmosis Purifier Machine
RO Water Treatment System Reverse osmosis process uses semi permeable spiral wound membranes to separate and remove dissolved solids, organic, pyrogens, sub micron colloidal matter and bacteria from water. Feed water is delivered under a pressure of approximately 16 kg/cm2 through reverse osmosis membranes. Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% bacterial in the feed water.
1. Capacity: 2T/H Reverse Osmosis System |
2. Rated power: 4.0 KW/H |
3. Voltage: 110V / 220V / 380V, 50Hz / 60Hz, single phase / 3phase |
4. Desalting rate:>=97% |
Components:
There are several kinds of consumables you need to replace regularly.
a. Quartz sand: replaced about every 15 months. 50kg/bag
b. Activated carbon: replaced about every 15 months. 25kg/bag
c. Resin: replaced about every 15 months. 25L/bag
d. PP Filter cartridge: replaced about every 1 month
e. Ro membrane: replaced about every 2 year
We suggest you buy 1- 2 years of PP filter cartridges together with machine. Because these PP filter cartridges need to replace every month.
Thank you so much for your inquiry. Any questions please contact us without any hesitation !We will reply you within 24hours.
Tel/ whatsApp/ wechat: +86-13711203110
Note:
Tell us the raw water/source of water
Provide water analysis report
Required production capacity( 500 liters per hour, 1000liters per hour…)
What's the pure water used for( drinking, bottle water or industrial use…)