Reverse Osmosis Water Filter System Water Purifier Machine Filtration Equipment

Product Introduction of RO Water Treatment System

Design Features:
1. Achieve deep filtration of water by increasing the pressure on water. In addition to general filters, reverse osmosis pure water equipment also has fine filters, granular activated carbon filters and compressed activated carbon filters. The fine filter has a finer filtering function than the general filter, and can better filter impurities in the water. As we know, activated carbon has a good adsorption and filtration function for odors and impurities. The reverse osmosis pure water equipment uses double activated carbon filters to realize the deep filtration of raw water and improve the filtration efficiency of the equipment. At the same time, it is also an innovation to enhance the filtration capacity by increasing the pressure of the water.
2. The core of reverse osmosis pure water equipment is the application of reverse osmosis membrane. The reverse osmosis membrane is a filter membrane with extremely small pore size. Using this membrane can realize ultra-fine filtration of raw water, and can divide water into high concentration and low concentration at the same time. Water with a higher concentration can be recycled and reused, and water with a lower concentration is pure water that can be used by humans.

The Basic Working Principle of RO Water Treatment System
1:Pre-treatment system
It mainly includes: raw water pump, quartz sand filter, dosing device, security filter, precision filter. Its main function is to reduce the pollution index of raw water and other impurities such as residual chlorine, so as to meet the water inlet requirements of reverse osmosis. The equipment configuration of the pretreatment system should be determined according to the specific conditions of the raw water.
2:Reverse Osmosis system
It mainly includes multi-stage high-pressure pumps, reverse osmosis membrane elements, membrane casings (pressure vessels), pressure instruments, flow meters, brackets, etc. Its main function is to remove impurities in the water and make the effluent meet the requirements of use. According to water requirements, a single-stage reverse osmosis device or a double-stage reverse osmosis device can be used.
RO membrane group

Advantages of RO water treatment system:
Reverse osmosis (RO) technology is a highly efficient and energy-saving technology. It relies on pressure to separate water and ions, so as to achieve the purpose of purification and concentration. The process has no phase change, generally does not require heating, low energy consumption, low operating cost, no pollution, convenient and reliable operation, high water quality and many other advantages. It has become an energy-saving technology for seawater and brackish water desalination. Has been widely used in medicine, electronics, chemical industry, food, seawater desalination and many other industries. Reverse osmosis technology has become a water treatment technology in modern industry. Reverse osmosis (RO) technology has become an important part of membrane separation technology.
(1) Fresh water can be extracted from seawater or brackish water;
(2) It is easy to remove organic matter, bacteria, colloids and other impurities dissolved in water to obtain high-purity water;
(3) Since the reverse osmosis process is a physical process without phase transition, it saves energy;
(4) Simple operation, easy automation and labor saving;
(5) Compact structure and small footprint, thereby reducing costs;
(6) As a concentration method, it can recover valuable components dissolved in the solution.

Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter (quartz sand filter) → Activated carbon filter → Soft water processor → Precision filter → High pressure pump → Primary reverse osmosis (RO) device → Purified water tank → High pressure pump → Two Stage reverse osmosis → ultraviolet sterilization device → water point.



Photos of Reverse Osmosis Water Treatment System

FAQ:

1. What is the design water yield of ro membrane element? (except anti-pollution membrane and seawater desalination membrane)

Model 4040 is designed by 0.25m3/h

Model 8040 is designed by 1-1.2m3/h

2. What is the material of mechanical filter?

Carbon steel, stainless steel, fiberglass

3.What are the multi-way control valves?

Manual control valve, automatic control valve

Multi - way control valve is divided into: filter valve and softening valve

Automatic control valve is divided into: time type and flow type.

Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean source, etc.