Mini Industrial Reverse Osmosis Water Filter System Ro Water Purifier

Product Introduction of RO Water Treatment System

What's the reverse osmosis system and main design?

Reverse Osmosis(RO) is a process that uses semi-permeable spiral wound membranes to separate and remove dissolved solids, organic,pyrogens,submicron colloidal matter,color,nitrate and bacteria from water. Feed water is delivered under pressure through the semi-permeable membrane,where water permeates the minute pores of the membrane and is delivered as purified water called permeate water.Impurities in the water are concentrated in the reject stream and flushed to the drain is called concentrate water. RO Membrane is mainly used in different small systems, such as domestic water Hospital and laboratory cleaning and other cleaning water equipment. Achieve the same high flux as conventional low pass and salt.

Advantages of RO water treatment system:

Technical Features:

1. American ultra-low pressure roll-type composite reverse osmosis membrane with high desalination rate and low operating pressure, excellent water quality, low operating cost and long service life;
2. High-efficiency, low-noise, high-quality high-pressure pumps;
3. The online product water conductivity meter can monitor the water quality at any time;
4. The product water and concentrated water are equipped with flow meters to monitor the water output and recovery rate of the system;
5. Pressure gauges before and after the fine filter, and pressure gauges before and after the reverse osmosis membrane can continuously monitor the pressure difference between the reverse osmosis membrane and the fine filter, prompting when to clean or replace;
6. The high pressure switch protects the reverse osmosis membrane from damage due to excessive pressure;
7. The low-pressure switch protects the high-pressure pump from damage due to water supply stop;
8. The stainless steel regulating valve adjusts the water output and the system recovery rate at any time;
9. The standard program automatic control system can reduce the membrane fouling speed, prolong the service life of the membrane, and ensure the stable and reliable water quality of the system effluent.

Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter (quartz sand filter) → Activated carbon filter → Soft water processor → Precision filter → High pressure pump → Primary reverse osmosis (RO) device → Purified water tank → High pressure pump → Two Stage reverse osmosis → ultraviolet sterilization device → water point.



Photos of Reverse Osmosis Water Treatment System

FAQ:

1. What is the design water yield of ro membrane element? (except anti-pollution membrane and seawater desalination membrane)

Model 4040 is designed by 0.25m3/h

Model 8040 is designed by 1-1.2m3/h

2. What is the material of mechanical filter?

Carbon steel, stainless steel, fiberglass

3.What are the multi-way control valves?

Manual control valve, automatic control valve

Multi - way control valve is divided into: filter valve and softening valve

Automatic control valve is divided into: time type and flow type.

Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean source, etc.