200LPH Seawater Desalination Reverse Osmosis Water Treatment System

What is the Seawater Desalination RO System?

The core process of desalination is the Reverse Osmosis Process, mainly used to treat the salty water with high TDS more than 10000ppm. It consists of a High pressure pump followed by an Energy Recovery device and the Reverse Osmosis Membranes.
In this process sea water is forced against semi-permeable membranes under pressure in a continuous flow condition. The high salt content of sea water requires that the operating pressure for Reverse Osmosis must be between 60-70 bar. As the water permeates through the membrane most of the dissolved impurities removed and 99.5% of the total salt is removed. The impurities are left behind in the flowing water and the concentrated stream from the membranes is discharged to the ocean.

Typical RO Processing of Seawater Desalination RO System

Feed water pump- Sand filter--Active carbon filter -Softener -Cartridge filter- High-pressure pump- RO system

1. Feed water pump: provide the pressure to quartz sand filter/active carbon filter;
2. Sand filter: Get rid of turbidity, suspended solids, organic impurities and colloid etc.;
3. Active Carbon filter: Remove the color, free chloride, organic matter and harmful matter etc.;
4. Softener; Get rid of calcium, magnesium and bicarbonate ions in original / source water, reduce water hardness;
5. Cartridge filter: prevent any deposition of large Particles, most of the bacteria, and viruses into the RO membrane;
6. High pressure pump: Provide the high pressure to RO membrane;
7. RO system: main part of pure water treatment plant. The desaltation rate up to 99%, capable of removing over 99% of ions, bacterias, particles and organics.

Working Process of Seawater Desalination RO System

RO Advantage

1. RO is a physical method to desalinate and purify water containing salt under room temperature without phase change. At present, the desalination rate of ultra-thin composite membrane elements can reach more than 99.9%, and can simultaneously remove colloids, organic matter, bacteria, viruses from water;

2. Water purification relies solely on the pressure of the water as the driving force, and its energy consumption is the lowest among other water treatment methods;

3. Reverse osmosis can run continuously to produce water, the system is simple and easy to operate, and the producing water is stable with good quality;

4. No chemical waste discharge, No waste acid and alkali neutralization process, no environmental pollution;

5. The reverse osmosis plant is highly automated with less time spending on operation and maintenance;

6. Compact size requires small space for operation and placement;

7. The removal rate of colloid such as silica and organic matter in water can reach 99.5%;

8. The reverse osmosis plant can produce water continuously without any extra operation such as regeneration;

9. It is adapted to the treatment of both brackish water and seawater, as well as freshwater treatment with low salt content.

Technical Indicators for Seawater Desalination RO System

1. Desalination rate 99.5 %
2. Water recovery rate 35 % - 40 %
3. Tons of water consumption 3 - 4 degrees
4. Operating cost per ton of water is 3 - 4 yuan.

Picture of Seawater Desalination RO System

FAQ

Q: What is the Seawater Desalination RO System?

A: The core process of desalination is the Reverse Osmosis Process, mainly used to treat the salty water with high TDS more than 10000ppm.

Q: What’s the type of your company? Manufacturer or Trading agent?

A: We’re the Hi-tech manufacturer in Water treatment industrial for almost two decades, we specialized in integrating Research & Development, Manufacturing, Sales, Engineering installation and Consulting on water treatment and water purification equipment and technologies.

Q: What’s your warranty?

A: Jufu offers 1 year warranty for the products.

The product itself can work for 5 years with proper use and maintenance.