Flat plate vulcanizer technical parameters

1. The electric heating tube of the electric heating flat plate vulcanizer is mainly used for heating the vulcanizer template. It is made of stainless steel tube or ordinary iron tube, and is divided into single-head and double-head tubes. In view of the high surface temperature of the tube when the product is in working state, and the requirements of thermal insulation and leakage current, the internal design uses high-temperature magnesium oxide powder and anti-oxidation heating wire. If necessary, you can consult the Jingangwan technical department to select high-temperature resistant stainless steel tubes, fully consider the installation and use environment, and use special treatment for component sealing requirements to meet customers' requirements for the safety and life of equipment heating components.

2. The technical parameters of the flat plate vulcanizer electric heating pipe are mainly: the working voltage of the single-head heating pipe of the vulcanizer is 220 (V) or 380 (V), the power used is made according to the use temperature of the template, the common pipe diameters are 14mm, 16mm, 18mm, etc., the material can be selected from SUS304 seamless pipe, the vulcanization use condition is template heating, the surface is polished and blackened, the sealing is glass sealing, epoxy resin, glue, and the electrical performance is long-term insulation value greater than 50MΩ, leakage current is less than 0.5mA.

3. The main technical requirements of the flat plate vulcanizer: the use temperature is usually 180-200℃℃, the surface load of the conventional electric heating pipe is 3-7W/square centimeter, the surface temperature of the flat plate vulcanizer template is uniform, the template hole spacing is reasonably arranged, so that the temperature difference of the hot plate surface is controlled within the minimum range, and the convenience of installation and use of the electric heating pipe is considered, and the star connection method is generally adopted.

4. The flat plate vulcanizer electric heating pipe is an electric heating element specially designed for electric heating flat plate vulcanizer. The flat plate vulcanizer is the main vulcanizing equipment for rubber products. The temperature difference on the hot plate surface is the main performance indicator of the flat plate vulcanizer. There are two main reasons for the large temperature difference on the hot plate surface:
I. The influence of the external environment temperature
II. The spacing arrangement design of the electric heating tube, please consult 4000860537. Therefore, the key to solving the problem of temperature difference on the hot plate surface of the electric heating flat plate vulcanizer is to find the relationship between the minimum temperature difference and the spacing arrangement of the electric heating tubes.