XJW-90 Rubber Cold feed pin extruder Single screw diameter is 90mm

Product Introduction:

The pin cold feed extruder with a screw diameter of 90mm manufactured by Qingdao Beishun is a device used to process high-viscosity materials such as rubber. The following is a detailed introduction:

Main features

Efficient mixing: The pin design enhances the mixing and uniformity of the materials, and can improve the rubber quality for products with relatively high rubber hardness and viscosity

Low-temperature processing: Cold rubber feed can be input. It is equipped with a heating control box to increase the rubber temperature, and through an efficient cooling system, it is suitable for processing heat-sensitive materials to prevent overheating of the material.

Stable output: The cold feed extruder is equipped with an extruder head to provide stable material flow and ensure product quality.

Components

Screw and barrel: 90mm diameter high-strength screw, optimized pin layout to improve mixing effect.

Cooling system: Maintain appropriate processing temperature and protect material properties.

Transmission system: Equipped with 75kw motor and hard gear reducer, it has low working noise and provides strong and stable power.

Application areas

Rubber products: Used for the production of motorcycle/bicycle inner tubes, rubber tubes, rubber parts, seals and other rubber products.

Plastic processing: Suitable for processing plastics that require low-temperature mixing.
Composite materials: used to manufacture products with a combination of various PE PP materials.
Precautions for use

Temperature control: strictly monitor and adjust the processing temperature.

Equipment maintenance: regular inspection and maintenance, check the gearbox oil, and ensure efficient operation of the equipment.

This type of extruder plays an important role in the field of rubber and plastic processing, and can improve mixing quality and production efficiency.

Extruder parameters:

Rubber cold feed vented extruder
Main application:
This extruder is mainly used to extrude various foam or solid rubber pipe, sheet, handle, sleeve, profile and sealing strip.
Main composition:
Motor, reducer, feed device, barrel, screw, head, temperature control device, vacuum pump, electrical control system and machine frame, etc..
Characteristics:
Screw is divided to feeding section, compression section, throttling section, exhaust section and extrusion section. Throttling section adopts whorl which is shallow slot, equidistance and isobathic; it can makes rubber compound get higher shear and stable conveying process, meanwhile, it also increases exhaust effect.