Rubber Metal Pipe Connector Vibration Damper With Steel Flange Europe Standard

JINGNING vibration dampers are designed to be used against sound and vibrations in pipelines and pumps, regulators and machines.

The vibration damper is made up of nitrile rubber with invulcanized
steel flanges completely separate from each other, from DN 80 with embedded,
elastically stored spacer bolts and reinforced sealing surface. The vibration damper is internally smooth which minimizes the flow resistance.
AL 86-GRV can be used at temperatures between -20℃~100℃
Resistance to cold water, hot water, oils and certain acids.

Note:Vibration dampers cannot be used to absorb vibrations, pulls or voltages. An interference-free function of vibration dampers requires proper piping, whereby the attachment points must be paid special attention. Beginning in DN 80 has spacer and control bolts built-in that prevents the vibration damper from tearing and does
possible to detect unauthorized tensile loads.

Specifications

Rubber material:EPDM,NBR,CR,VITON,PTFE,SBR

Structure:Inner layer, outer layer, skeleton, metal ring

Flange hole standard:BS,ANSI,DIN,JIS,UNI,ISO etc international standard

Size range:DN20-DN200

Product Features

1. Small size, easy to install and maintain;
2. Damping capacity, can reduce the structural noise;
3. The internal seamless can stand high pressure;
4. Rubber high temperature corrosion, and acid and alkali oil and other media, long service life.

Advantages of JINGNING® rubber-metal pipe connectors

Interception of sound transmissions and noise-damping properties

Damping of vibrations

Where JINGNING® Rubber Vibration Dampers are used:

On industrial equipment

On motors

On machines

On pumps

On compressors

Established sectors for JINGNING® Rubber Vibration Dampers:

Building services engineering

Heating engineering

Water supply and water treatment

Installation / Maintenance

Installation instructions are included with each vibration damper. Pipelines must be fitted with mounting points at the installation sites. mounting
should be done in an easily accessible place eg. at the circulation pump, at the shunt valve or for control fittings, i.e. in places that constantly
monitored and controlled. During the annual inspection of the heating system, vibration dampers shall be checked for functionality (possibly surface cracks, increased hardness, lack of elasticity, etc.).