Product Introduction

Small tie rod transverse corrugated compensator is a kind of compensator specially designed for pulverized coal pipelines, also known as special three-dimensional corrugated compensator for pulverized coal pipelines. It consists of two sections of bellows, an intermediate pipe and a small tie rod with a limit nut, and is made of 1Cr18Ni9Ti or SUS304 material, and is manufactured by a multi-layer one-time hydroforming process.

The structure of the JXH small tie rod transverse corrugated compensator
1. Bellows: This part is the main part of the compensator, which is designed with transverse corrugated structure to absorb the thermal expansion and cold contraction of the pipeline.
2. Small tie rod: This part is made of high-strength materials and is used to connect the two ends of the bellows, and at the same time can withstand the pressure and temperature of the pipe.
3. Support frame: This part is made of high-strength material, which is used to support the entire compensator, and at the same time, it can prevent the bellows from twisting and deforming.

Benefits

1. It can effectively compensate for the lateral vibration and fluctuation of the connection, and prevent the fatigue, fracture and damage of the connector in the working process.
2. It has good wear resistance and corrosion resistance, and is suitable for mechanical connection in various harsh environments.
3. Easy to install and easy to use, which can greatly reduce the maintenance and maintenance cost of mechanical connection.

Product parameters

1. Metallurgical industry: In the high-temperature gas transmission pipeline, the transverse corrugated compensator of small tie rod is widely used, especially in the northern cities with colder climates, and the compensator is widely used in the thermal pipe network to absorb the expansion and prevent the leakage of gas leakage and rainwater.
2. Chemical industry: In the chemical field, the small tie rod transverse corrugated compensator is used for the transportation of various industrial gases, water, oil and other fluids, and plays an important role in the reciprocating movement, thermal expansion absorption, vibration absorption and piping adjustment of the pipe system.
3. Power industry: In the power industry, the small tie rod transverse corrugated compensator is used in the piping system of power equipment to ensure the stable operation of the system.

Product installation precautions

1. Inspection and cleaning: Before installation, check whether the appearance of the corrugated compensator is intact, and confirm that the model, specification and design requirements are consistent. At the same time, clean up the debris inside and outside the pipeline to ensure the cleanliness of the connection parts and avoid debris affecting the installation quality.
2. Proofreading size: Confirm that the flanges or joints at both ends of the pipeline are consistent with the size of the connecting ends of the compensator, and the pipe spacing matches the installation length of the compensator.
3. Installation direction: Pay attention to the flow direction identification, some corrugated compensators will indicate the flow direction of the medium when leaving the factory, and must be installed in accordance with the direction of the identification. The direction of the bellows should be consistent with the displacement direction of the pipe.
4. Alignment and alignment: Make sure that the pipeline is aligned with the axis of the corrugated compensator, and the fixed points should be set on both sides of the corrugated compensator when installing the fixed points to control the displacement of the pipeline and prevent unnecessary stress.
5. Set up the guide bracket: The guide bracket is installed to guide the displacement direction of the pipeline, ensuring that the corrugated compensator only moves in the designed direction. The guide bracket should be installed close to the compensator and allow the pipe to move freely in the axial or lateral direction.
6. Welding requirements: If the corrugated compensator needs to be welded and installed, overheating should be avoided, and segmented welding can be used to reduce heat concentration. Protective measures can be taken before welding, such as wrapping the bellows with a damp cloth.

Inventory display

FAQ

Q: What is your terms of packing?

A: Generally, we pack our goods in plywood case.

Q: Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery.

Q: How do you make our business long-term and good relationship?

A: We keep good quality and competitive price to ensure our customers benefit ;We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Q: What are the advantages of the small tie rod transverse corrugation compensator?

A: It has good corrosion resistance, strong wear resistance and good shock absorption.

Q: What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.