6 Inch Carbon Steel Flexible Flanged Single Ball Rubber Expansion Joints

Features

1.It can deal with the problem that the pipe diameter is different when the metal material pipeline is connected, and at the same time, it has the practical effect of shock absorption and noise reduction, which can save the pipe assembly and save the cost. It consists of an inner rubber layer, a plastic rope ball and a loose metal flange.

2.It has the characteristics of compressive resistance, good ductility, large exhaust volume, balanced pipeline error, very good vibration absorption and noise reduction effect, and convenient assembly.

3.According to different materials, rubber flexible joints can be made into acid-resistant, alkali-resistant, corrosion-resistant, acid-alkali resistant, heat-resistant, low-temperature resistant, wear-resistant, etc., suitable for various media and natural environments.

4.Flanged rubber expansion joint is generally composed of inner rubber layer, textile reinforcement layer, double rubber scraping polyester cord cloth, middle adhesive, outer rubber layer, top reinforced metal ring or steel wire ring, through continuous temperature, high pressure vulcanized rubber after shaping, it is a composite rubber pipe with loose metal material flange or parallel surface connector.

Advantage

1. This product can greatly reduce the vibration and noise of the rubber expansion joint joint system, and can fundamentally solve the problems of interface displacement, axial rubber expansion joint and misalignment of various pipelines.

2. According to different materials, it can be made into acid-resistant, alkali-resistant, corrosion-resistant, oil-resistant, heat-resistant and other varieties, and can adapt to a variety of media and environments.

3. The material belongs to the polar rubber expansion joint, which has good sealing, light weight, easy installation and maintenance, and long service life, but avoid contact with sharp instruments to avoid puncturing the ball.

4. If the overhead is used, it can be equipped with an elastic bracket, and the bolts should be tightened diagonally during installation.

5. If the pressure of the pipeline is too high, the limit bolts should be used to connect the flanges at both ends together.

Main connection size

Product Introduction

FAQ:

Q:What is your delivery time?

A:It depends on the quantity, but usually no more than 20 working days.

Q:What is your packing method?

A:Wrap it in plastic film first, then put it into a carton, and then put it into a wooden case.

Q:Are you a trading company or a manufacturer?

A:We are a factory producing rubber expansion joints, duckbill valves, corrugated compensators, and we have more than 20 years of experience.

Q:Can we choose different materials?

A:Yes, the material can be selected according to your requirements.