EN 1092-2 Oil-Resistant Silicone Food Grade Rubber Expansion Joints
Product Introduction
Food grade rubber joint is a kind of equipment specially used for food production pipeline connection, and its main feature is the use of food grade materials to ensure that there will be no contamination of food in the food production process. Food-grade rubber joints are usually made of nylon cord as a reinforcing material, vulcanized under heating and pressurization conditions, and have excellent sealing performance and corrosion resistance.
The material and workmanship of the product
Food-grade rubber joints are made of food-grade silicone rubber as the main material, which has been strictly screened to ensure that it does not contain toxic and harmful substances and meets relevant food safety standards and regulations. During the production process, strict hygiene standards and requirements must be observed, including cleaning, disinfection, sealing and other links to ensure the quality and safety of products.
Specifications and performance of the product
Food-grade rubber fittings are available in a wide range of specifications, ranging from DN25mm to DN400mm, and the working pressure can reach 0.6-1.6MPa. Its operating temperature range is -40 degrees to 80 degrees, with good shock absorption, noise reduction and telescopic performance, suitable for cold water, hot water, compressed air and other pipeline installation environments.
Product parameters
NO | Name | Material |
1 | Inner and outer layer | Food grade silicone rubber |
2 | Frame | Nylon cord fabric |
3 | Pressurized ring | Steel wire strand |
4 | Flange | Stainless steel 304 or 316 |
Nominal diameter |
Length (mm)
| Axial displacement(mm) | Horizontal displacement(mm) | Deflection angle | ||
mm | inch | Elongation | Compression | |||
32 | 1 1/4 | 95 | 6 | 9 | 9 | 15° |
40 | 1 1/2 | 95 | 6 | 10 | 9 | 15° |
50 | 2 | 105 | 7 | 10 | 10 | 15° |
65 | 2 1/2 | 115 | 7 | 13 | 11 | 15° |
80 | 3 | 135 | 8 | 15 | 12 | 15° |
100 | 4 | 150 | 10 | 19 | 13 | 15° |
125 | 5 | 165 | 12 | 19 | 13 | 15° |
150 | 6 | 180 | 12 | 20 | 14 | 15° |
200 | 8 | 210 | 16 | 25 | 22 | 15° |
250 | 10 | 230 | 16 | 25 | 22 | 15° |
300 | 12 | 245 | 16 | 25 | 22 | 15° |
350 | 14 | 255 | 16 | 25 | 22 | 15° |
400 | 16 | 255 | 16 | 25 | 22 | 15° |
450 | 18 | 255 | 16 | 25 | 22 | 15° |
500 | 20 | 255 | 16 | 25 | 22 | 15° |
600 | 24 | 260 | 16 | 25 | 22 | 15° |
700 | 28 | 260 | 16 | 25 | 22 | 15° |
800 | 32 | 260 | 16 | 25 | 22 | 15° |
900 | 36 | 260 | 16 | 25 | 22 | 15° |
1000 | 40 | 260 | 18 | 26 | 24 | 15° |
1200 | 48 | 260 | 18 | 26 | 24 | 15° |
1400 | 56 | 350 | 20 | 28 | 26 | 15° |
1600 | 64 | 350 | 25 | 35 | 30 | 10° |
1800 | 72 | 350 | 25 | 35 | 30 | 10° |
2000 | 80 | 420 | 25 | 35 | 30 | 10° |
2200 | 88 | 420 | 25 | 35 | 30 | 10° |
2400 | 96 | 420 | 25 | 35 | 30 | 10° |
2600 | 104 | 450 | 25 | 35 | 30 | 10° |
2800 | 112 | 450 | 25 | 35 | 30 | 10° |
3000 | 120 | 500 | 25 | 35 | 30 | 10° |
Product Features
1. Material safety: Food-grade rubber joints are made of rubber materials that meet food-grade standards, which do not contain toxic substances and will not pollute food.
2. High and low temperature resistance: It has good high and low temperature resistance, and can adapt to different production environments and use scenarios.
3. Corrosion resistance: It has good corrosion resistance to acids and alkalis and other chemicals, and can be used for a long time without aging, cracking and other problems.
4. Easy to clean: The surface is smooth, not easy to adhere to dirt, easy to clean, and meets the hygienic requirements of food production.
5. Environmental protection: Environmental pollution is strictly controlled in the production process, and the products can be recycled and reused, which meets the requirements of environmental protection.
Product application field
Food-grade rubber joints are widely used in food, beverage, dairy, pharmaceutical and other production fields. In the production process, they are used to connect various conveying pipes to ensure that the fluid is not contaminated or leaked during transmission. At the same time, they are also used to connect production equipment, such as fillers, sterilizers, packaging machines, etc., to ensure the continuity and stability of the production process.
Product display from different angles
Different forms of rubber joints
Tie rod limit rubber joint End face fully sealed rubber joint Union threaded rubber joint
Double ball rubber joint with tie rod PTFE lined rubber joint Eccentric reducing rubber joint
Concentric reducing rubber joint Single sphere rubber joint Double sphere rubber joint
FAQ
Q: Have your products been exported?
A: Yes, they have been exported to USA, Canada, Australia, Russia, Chile, Panama, Nicaragua, UAE, Saudi Arabia, Egypt, Sri Lanka, Nigeria, Vietnam, Indonisia, Singapore, Greece, Netherland, Georgia, Romania, Ireland, India, Thailand, Pakistan, Philippines...
Q: Do you provide samples? Is it free or charged?
A: Yes, we can offer sample free but shipping charges covered by customer.
Q: Can the logo on the rubber ball be customized?
A: Yes, it can be marked with your company's logo. We can provide OEM and ODM services.
Q: Can the length of the double ball be customized?
A: Of course, we have many different specifications and models of molds, which can be customized according to your length.
Q: What is the working pressure range of food grade rubber fittings?
A: 0.6-1.6Mpa.
Q: What are the standards for flanges?
A: There are ANSI, DIN, BS, JIS and other standards.